Send Email
Send SMS
Search
Mootek Technologies
Mootek Technologies


Digital Video Optical Transceivers

Our product range includes a wide range of 1 channel mini digital video optical transceiver, mini digital video optical transceiver, digital video optical transceiver (swv60100), 4 channel digital video optical transceiver and 4 channels digital video optical transceiver.

1 Channel Mini Digital Video Optical Transceiver

REQUEST CALLBACK

1 Channel Mini Digital Video Optical Transceiver
Approx. Rs 10,000 / Piece
Get Best Quote

3onedata digital video optical transceivers SWV60100 series can simultaneously transmit 1 channel of 8-bit digitally encoded broadcast quality video/return or bidirectional data/unidirectional or bidirectional audio/Ethernet/Telephone/Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environment.

    Features1.8-bit digitally encoded and non-compression broadcast quality video transmission 
    2.Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols
    3.Support any high-resolution video signal  
    4.Automatic compatible PAL, NTSC and SECAM video system 
    5.Power supply and other parameter state indication, which can monitor the operation condition of system 
    6.Support no-damage regenerative trunk of video 
    7.Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required .
    8.Special ASIC design .
    9.Industry-grade of operating temperature from -10°C to 65°C , which is 
    10.applied to the different working environment
    11.Hot-swap function   SpecificationTechnical Specification
    Video channels:1 channel
    Video bandwidth:8 MHz
    Automatic compatible video system:PAL, NTSC, SECAM
    Video input/output impedance:75 Ω(unbalance)
    Video signal-to-noise ratio:≥67dB
    Differential gain:(10%-90%APL) DG <1% ( typical value)
    Differential phase:(10%-90%APL) DP <0.7° ( typical value)
    Video connector:BNC
    Fiber-optic Specification
    F/O connector: FC/ST/SC
    TX :Power:-15 ~ -8dBm   Sensitivity :≤-35dBm 
    RX:Power:-15 ~ -8dBm   Sensitivity :≤-35dBm
    Transmission Distance :20KM (single mode)
    Operating Wavelength: TX1310/RX1550nm (Transmitter); TX1550/RX1310nm (Receiver)
    Specification of custom-made options
    1. Data
    Connector: Terminal Blocks
    Encoded type : RS485 / RS422 / RS232 / Manchester
    Data rate : 0 - 400Kbps
    BER:  ≤10-9
    2. Audio
    Connector: Terminal Blocks
    Audio input / output impedance :600Ω(Balance/ unbalance)
    Audio input / output voltage :2Vp-p ( typical value)
    Audio input / output level :0dBm ( typical value)
    Video bandwidth:10HZ~12KHZ
    Audio digital encoded bandwidth :24bit
    Audio signal-to-noise ratio: S/N≥95dB  (weighted)
    3. Telephone
    Connector: RJ11
    Bandwidth :8KHZ
    Features:Support call-showing function ;support H-F
    Operating mode : Point to point hotline mode / FXS-FXO
    4. Ethernet
    Connector: RJ45
    Support mode : Half duplex or Full duplex
    Standards:IEEE802.3 
    Data rate : 10M / 100Mbps 
    Bandwidth: 25M
    Characteristic
    Dimensions: 11.1(L)×10.7(W)×2.8(H) cm
     Operating Voltage: DC5V (we will offer external power supply from AC96-240V to DC5V for each unit )
    Operating Temperature: -10°C to +65°C
    Storing Temperature: -45°C to +85°C
    Humidity: 0 to 95% non-condensing
  • Minimum Order Quantity: 1 Piece
  • Pay Mode Terms: T/T (Bank Transfer)
  • Yes! I am Interested

    Mini Digital Video Optical Transceiver

    REQUEST CALLBACK

    Mini Digital Video Optical Transceiver
    Approx. Rs 10,000 / Piece
    Get Best Quote

    Model : NP308T-8D(RS-232)NP308T-8D(RS-232) is an high performance, industrial grade serial to Ethernet server, it can satisfy some kinds of customer requirements in consumption, temperature, volume and handle ability. It provides 8 port RS232 (RS-232 connector: RJ45) and 1 port 10/100Base-Tx Ethernet, can focus manage disperse serial device, master through network, easy, convenience. In application, can configure, upgrade through WEB.
    Moreover, NP308T-8D(RS-232) provide strong function configuration tools based in Windows platform, it can guide user configure the device step by step, all configurations are coming true by WEB or Telnet, support cross-gateway and cross-router, user can can flexible configure IP address, server and client mode, data bag size etc.
    NP308T-8D(RS-232) adopts EMC protection design, can work in rugged environment.

      Features

      1.Support 10/100M Ethernet
      2.Support 8 Port RS-232
      3.Support WEB and Telnet configuration
      4.Support TCP, UDP, ARP, ICMP, DHCP and DNS protocol
      5.Support TCP Server, TCP Client, TCP Auto, UDP and
      Real COM driver working mode
      6.Support UDP multicast and UDP subnet mode
      7.Support heartbeat time and time over disconnect function
      8.Support cross-gateway and cross-router communication
      9.Support virtual serial COM port access and Network interruption automatic recovery
      10.Provide Windows configuration tools for easy to use, easy to bath install.
      11.Industrial grade design, IP30 protection grade
      12.No fan, low consumption design
      13.Working temperature: -40???85℃

      Specification

      Ethernet port
      Standard: 10Base-T, 100Base-TX
      Protocol: Support TCP, UDP, APR, ICMP and DHCP
      Signal: Rx+, Rx-, Tx+, Tx-
      Speed: 10/100Mbps
      Working: Full-duplex and half duplex
      Working mode: Support TCP Server and Client
      Transfer distance: 100m
      Connector: RJ45
      RS232 port
      RS232 port number: 8
      RS-232 signal: DCD, RXD, TXD, DTR, GND, DSR, RTS, CTS
      Parity bit: None, Even, Odd, Space, Mark
      Data bit: 5bit, 6bit, 7bit, 8bit
      Stop bit: 1bit, 1.5bit, 2bit
      Band rate: 300bps???115200bps
      Loading: point to point
      Transfer distance: no more than 15m
      Connector: RJ45
      Protection: class 3 static
      LED Indicator
      Working statue indicator: RUN
      Power (PWR)
      Ethernet port connection statue (Link)
      RS232 port transmit data indicator: TX1~TX8
      RS232 port receive data indicator: RX1~RX8
      Power supply
      Input voltage: 12VDC(9~48VDC)
      No-load consumption:1.43W@12VDC
      Full-load consumption: 1.98W@12VDC
      Environment limits
      Working temperature: -40~85℃
      Storage temperature: -40~85℃
      Relative humidity: 5%~95%???non-condensing???

  • Pay Mode Terms: T/T (Bank Transfer)
  • Yes! I am Interested

    Digital Video Optical Transceiver (SWV60100)

    REQUEST CALLBACK

    Digital Video Optical Transceiver (SWV60100)
    Approx. Rs 8,000 / Piece
    Get Best Quote

    Model SwV60100
    3onedata digital video optical transceivers SWV60100 series can simultaneously transmit 1 channel of 8-bit digitally encoded broadcast quality video/return or bidirectional data/unidirectional or bidirectional audio/Ethernet/Telephone/Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environment
    Yes! I am Interested

    4 Channel Digital Video Optical Transceiver

    REQUEST CALLBACK

    4 Channel Digital Video Optical Transceiver
    Approx. Rs 8,000 / Piece
    Get Best Quote

    Model : SWV604003onedata digital video optical transceivers SWV60400 series can simultaneously transmit 4 channels of 8-bit digitally encoded broadcast quality video/return or bidirectional data/unidirectional or bidirectional audio/Ethernet/Telephone/Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environment.
    Features1.8-bit digitally encoded and non-compression broadcast quality video transmission 
    2.Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols
    3.Support any high-resolution video signal  
    4.Automatic compatible PAL, NTSC and SECAM video system 
    5.Power supply and other parameter state indication, which can monitor the operation condition of system 
    6.Support no-damage regenerative trunk of video 
    7.Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required 
    8.Special ASIC design
    9.Industry-grade of operating temperature from -10°C to 65°C , which is applied to the different working environment
    10.Hot-swap function 
    11.Stand-alone type or card-type installed in 19"4U rack-mount chassis

    SpecificationTechnical Specification
    Video channels???4 channels
    Video bandwidth???8 MHz
    Automatic compatible video system???PAL, NTSC, SECAM
    Video input/output impedance???75 Ω(unbalance)
    Video signal-to-noise ratio???≥67dB
    Differential gain???(10%-90%APL) DG <1% ( typical value)
    Differential phase???(10%-90%APL) DP <0.7° ( typical value)
    Video connector???BNC
    Fiber-optic Specification
    F/O connector: FC/ST/SC
    TX ???Power:-15 ~ -8dBm   Sensitivity :≤-35dBm 
    RX???Power:-15 ~ -8dBm   Sensitivity :≤-35dBm
    Transmission Distance :20KM (single mode)
    Operating Wavelength: TX1310/RX1550nm (Transmitter); TX1550/RX1310nm (Receiver)
    Specification of custom-made options
    1. Data

    Connector: Terminal Blocks
    Encoded type : RS485 / RS422 / RS232 / Manchester
    Data rate : 0 - 400Kbps
    BER:  ≤10-9
    2. Audio
    Connector: Terminal Blocks
    Audio input / output impedance :600Ω(Balance/ unbalance)
    Audio input / output voltage :2Vp-p ( typical value)
    Audio input / output level :0dBm ( typical value)
    Video bandwidth:10HZ~12KHZ
    Audio digital encoded bandwidth :24bit
    Audio signal-to-noise ratio: S/N≥95dB  (weighted)
    3. Telephone
    Connector: RJ11
    Bandwidth :8KHZ
    Features???Support call-showing function ;support H-F
    Operating mode : Point to point hotline mode / FXS-FXO
    4. Ethernet
    Connector: RJ45
    Support mode : Half duplex or Full duplex
    Standards???IEEE802.3 
    Data rate : 10M / 100Mbps 
    Bandwidth: 25M
    Characteristic
    Dimensions: 19.2(L)×17.3(W)×2.8(H) cm
    Operating Voltage: DC5V (we will offer external power supply from AC96-240V to DC5V for each unit )
    Operating Temperature: -10°C to +65°C
    Storing Temperature: -45°C to +85°C
    Humidity: 0 to 95% non-condensing
    MTBF: ≥10 5 hours
    Warranty: 5 years
    Approvals: FCC,CE, RoHS approvals 
    Yes! I am Interested

    1 Channel Mini Digital Video Optical Transceiver

    REQUEST CALLBACK

    1 Channel Mini Digital Video Optical Transceiver
    Approx. Rs 8,000 / Piece
    Get Best Quote

    3onedata digital video optical transceivers SWV60100 series can simultaneously transmit 1 channel of 8-bit digitally encoded broadcast quality video/return or bidirectional data/unidirectional or bidirectional audio/Ethernet/Telephone/Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environment.

      Features1.8-bit digitally encoded and non-compression broadcast quality video transmission 
      2.Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols
      3.Support any high-resolution video signal  
      4.Automatic compatible PAL, NTSC and SECAM video system 
      5.Power supply and other parameter state indication, which can monitor the operation condition of system 
      6.Support no-damage regenerative trunk of video 
      7.Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required .
      8.Special ASIC design .
      9.Industry-grade of operating temperature from -10°C to 65°C , which is 
      10.applied to the different working environment
      11.Hot-swap function  SpecificationTechnical Specification
      Video channels:1 channel
      Video bandwidth:8 MHz
      Automatic compatible video system:PAL, NTSC, SECAM
      Video input/output impedance:75 Ω(unbalance)
      Video signal-to-noise ratio:≥67dB
      Differential gain:(10%-90%APL) DG <1% ( typical value)
      Differential phase:(10%-90%APL) DP <0.7° ( typical value)
      Video connector:BNC
      Fiber-optic Specification
      F/O connector: FC/ST/SC
      TX :Power:-15 ~ -8dBm   Sensitivity :≤-35dBm 
      RX:Power:-15 ~ -8dBm   Sensitivity :≤-35dBm
      Transmission Distance :20KM (single mode)
      Operating Wavelength: TX1310/RX1550nm (Transmitter); TX1550/RX1310nm (Receiver)
      Specification of custom-made options
      1. Data
      Connector: Terminal Blocks
      Encoded type : RS485 / RS422 / RS232 / Manchester
      Data rate : 0 - 400Kbps
      BER:  ≤10-9
      2. Audio
      Connector: Terminal Blocks
      Audio input / output impedance :600Ω(Balance/ unbalance)
      Audio input / output voltage :2Vp-p ( typical value)
      Audio input / output level :0dBm ( typical value)
      Video bandwidth:10HZ~12KHZ
      Audio digital encoded bandwidth :24bit
      Audio signal-to-noise ratio: S/N≥95dB  (weighted)
      3. Telephone
      Connector: RJ11
      Bandwidth :8KHZ
      Features:Support call-showing function ;support H-F
      Operating mode : Point to point hotline mode / FXS-FXO
      4. Ethernet
      Connector: RJ45
      Support mode : Half duplex or Full duplex
      Standards:IEEE802.3 
      Data rate : 10M / 100Mbps 
      Bandwidth: 25M
      Characteristic
      Dimensions: 11.1(L)×10.7(W)×2.8(H) cm
       Operating Voltage: DC5V (we will offer external power supply from AC96-240V to DC5V for each unit )
      Operating Temperature: -10°C to +65°C
      Storing Temperature: -45°C to +85°C
      Humidity: 0 to 95% non-condensing
      MTBF: ≥10 5 hours
      Warranty: 5 years
      Approvals: FCC,CE, RoHS approvals
       
  • Minimum Order Quantity: 5 Piece
  • Pay Mode Terms: T/T (Bank Transfer)
  • Yes! I am Interested

    4 Channels Digital Video Optical Transceiver

    REQUEST CALLBACK

    4 Channels Digital Video Optical Transceiver
    Approx. Rs 13,000 / Piece
    Get Best Quote

    Introduction:
    MODEL7304 is a high-performance V.35 optic fiber modem developed by using a dedicated integrated circuit. It is to modulate a N64K V.35 data signal directly over single or multi-mode optic fiber for a transmission via optic cable line. At another end of the optic cable, optical signal is demodulated into a V.35 data signal. V.35 interface may be directly connected with the V.35 interfaces of image and data terminals or the WAN ports of MUX, exchanger and router for a dedicated network setup or a LAN connection.
    Features:
    1. Rate N64Kbit/s (N=1~32)
    2. Support the loopback of local analog/digital interface
    3. Support remote loopback function
    4. Support pseudo-random code test function
    5. 120km trunking -free transmission distance for single-mode optic fiber
    6. Capable to be communicated with FE1 Fiber Modem
    7. Available with complete line detection and alarm indications
    8. Available with independent structure and 19-inch Rack-mountable structure Rack-mountable structure can be inserted with 16 modules
    9. AC 220V and DC 48V inputs may be selected for fiber optic modems of both structure
    10. For Rack-mountable fiber optic modems, dual power supply heat backup is provided to ensure a high operating reliability

    Specifications:
    Optic interface
    Line mode type: CMI
    Line mode rate: 2.048Mbps
    Operating wavelength: 850nm,1310nm or 1550nm
    Optic fiber connector: SC/PC
    Applicable optic fiber : multi-mode, single-mode
    Transmission distance: Single-mode: up to 120km
    Multi-mode: up to 2km
    V.35 interface
    Data rate: N64Kbps N=1~32
    Available with CTS/RTS (Hardware) flow control function
    Type of connector: M34 connector
    Operating mode: DCE
    Indicator lamps
    To indicate the operating status of power supply, data receiving/sending, loopback and random code test, code missing alarm, out-of-frame alarm etc.
    Structure
    Independent: 140mm (depth) x 210mm (width) x 42mm (height)
    Rack-mountable: 19in 4.5U standard casing
    Power supply
    Independent: 85V264V AC input, 5V/2A output
    -36V-72V DC input , 5V/2A output
    Rack-mountable: 150V260V AC input, 5V/16A , 12V/1A output
    -38V-58V DC input, 5V/16A , 12V/1A output
    Power consumption: 3W
    Operating temperature: 0C 50C
    Storage temperature: -20C 80C
    Humidity: 5% (free of condensate)
    Warranty: 5 years
    Approvals: FCC, CE, RoHS approvals
  • Minimum Order Quantity: 1 Piece
  • Pay Mode Terms: T/T (Bank Transfer)
  • Yes! I am Interested

     
    X


    Call Us:  +91-8071807813
    Mootek Technologies
    D. Krish (Proprietor)
    N. No. 10, O. No. 14, 2nd Floor, Aranganathan Subway Road Kaveri Nagar, Saidapet, Saidapet Kaveri Nagar,
    Chennai - 600015, Tamil Nadu, India
    Contact via E-mail
    Contact via SMS



    Home  |   Profile   |  Our Product Range  |  Site Map  |   Contact Us   |   Mobile Site

    © Mootek Technologies. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Mootek Technologies