Send Email
Send SMS
Search
Mootek Technologies
Mootek Technologies


RS-232-422-485 to Fiber Optic Converter

We are leading in manufacturing and supplier of RS-232-422-485 to Fiber Optic Converter in Chennai, Tamilnadu, India.
We Mootek Technologies one of the leading supplier in chennai for Serial to Fiber products and Serial to Fiber Optic Converter. We do supply our products especially very suit to industrial standard along with rugedness too. More overAll our products would meet the present industry standard and having with all safety testimonials and certifications well tested and user friendy products with advanced features. Its our intention to supply quality products to our clients

We have IndustrialFiber Optic Converter
RS-232/485/422 to optic fiber converter
  • RS232/485/422 to optic fiber, multi-mode 2Km, 9V-36VDC, SC, FC or ST optional
  • RS232/485/422 to optic fiber, single-mode 20Km, 9V-36VDC, SC, FC or ST optional
  • RS232/485/422 to optic fiber, single-mode, single fiber 20Km, 9V-36VDC, SC, FC or ST connector

RS-232 to optic fiber converter
  • RS232 to optic fiber, multi-mode 2Km, 5VDC, SC, FC or SToptional, Standalone or insert the Rack
  • RS232 to optic fiber, single-mode 20Km, 5VDC, SC, FC or ST optional, Standalone or insert the Rack
  • RS232 to optic fiber, single-mode, single fiber 20Km, 5VDC, SC, FC or ST optional, Standalone or insert the Rack

RS-485/422 to optic fiber converter
  • RS485/422 to optic fiber, multi-mode 2Km, 5VDC, SC, FC or ST optional, standalone or insert the Rack
  • RS485/422 to optic fiber, single-mode 20Km, 5VDC, SC, FC or ST optional, standalone or insert the Rack
  • RS485/422 to optic fiber, single-mode, single fiber 20Km, 5VDC, SC, FC or ST optional, standalone or insert the Rack

Rs232/485/422 To Ethernet Converter

REQUEST CALLBACK

Rs232/485/422 To Ethernet Converter
Approx. Rs 6,999 / Pack(s)
Get Best Quote

We are leading in manufacturing and supplier of Model MT277 Multimode Converter in Chennai,Tamilnadu,India.
Specifications:
RS-232/485/422
Standards: EIA RS-232C, RS-485, RS422 standard
RS-232 signal: OUT(TX), IN(RX), GND
RS-422 signal: T+, T-, R+, R-, GND
RS-485 signal: D+, D-, GND
Working mode: Asynchronism, point to point or multi point, 2 wire half-duplex,4 wire full duplex
Baud rate:0~115.2Kbps, auto test serial signal rate detect signal speed automatically, zero delay time
Transfer distance: RS-485/422 side:1.2Km(9600bps)
RS-232 side: no less than 5m
Max number of drops: 128 nodes(RS-485/422)
Port protect: 600W surge protection / 15KV ESD protection
Fiber Optic
Connectors: SC, FC or ST, optional
Fiber optic cables:Single Mode:8.3/125,8.7/125,9/125 or 10/125um
Muti-Mode:50/125,62.5/125 or 100/125 um
Transmission: 20, 40,60,80,100, 120km(SM),
2km(MM) optional
Wavelength:850nm,1310nm,1550nm
Power
Power input: 936VDC power input(2 bit terminal block)
Consumption: 120mA
Environment
Operating temperature: -40°C to 85°C
Storage temperature: -40°C to 85°C
Humidity: 5% to 95%(no condensation)
Appearance
Dimensions: 100.0mm×69.0mm×22.0mm
Material: Iron(shell)
Color: White
Weight: 230g
Warranty: 5 years
Approvals: FCC, CE, RoHS approvals
  • Minimum Order Quantity: 1 Pack(s)
  • Yes! I am Interested

    Serial To Ethernet Converter

    REQUEST CALLBACK

    Serial To Ethernet Converter
    Approx. Rs 6,999 / Piece
    Get Best Quote

    Model : NP301NP301 serial device server is designed to make your serial devices internet ready instantly. It provides 1 port RS232/485/422 (RS232, DB9M; RS485/422, 5 bit terminal block) and 1 port 10/100Base-T(X).It makes them ideal choice for connecting decentral serial devices and Host computer to an IP based Ethernet, making it easily and conviniently for your management. Its software can be setting and updating by serial program group in the application. It supports TCP, UDP, ARP, ICMP, DHCP and Windows Native COM, LLF functions.
    What's more, NP301 serial devices server provides powerful management configuration tools based on Windows, guiding users’ configuration of the devices step by step. All configurations can be done by network and serial port, supporting communication across gateway and router. In addition, it allows users to configurate flexibly IP address, Server or Client mode, size of packet, etc.
    NP301 serial device sever is designed with EMC protection, and power supply have overcurrent and overvoltage protection. These make it woking stably in hazardous environment.
    Easy wall and DIN-Rail mounting.
    Yes! I am Interested

    1 Port Rs232/485/422 To Ethernet Converter

    REQUEST CALLBACK

    1 Port Rs232/485/422 To Ethernet Converter
    Approx. Rs 6,999 / Piece
    Get Best Quote

    Model : NP301NP301 serial device server is designed to make your serial devices internet ready instantly. It provides 1 port RS232/485/422 (RS232, DB9M; RS485/422, 5 bit terminal block) and 1 port 10/100Base-T(X).It makes them ideal choice for connecting decentral serial devices and Host computer to an IP based Ethernet, making it easily and conviniently for your management. Its software can be setting and updating by serial program group in the application. It supports TCP, UDP, ARP, ICMP, DHCP and Windows Native COM, LLF functions.
    What's more, NP301 serial devices server provides powerful management configuration tools based on Windows, guiding users’ configuration of the devices step by step. All configurations can be done by network and serial port, supporting communication across gateway and router. In addition, it allows users to configurate flexibly IP address, Server or Client mode, size of packet, etc.
    NP301 serial device sever is designed with EMC protection, and power supply have overcurrent and overvoltage protection. These make it woking stably in hazardous environment.
    Easy wall and DIN-Rail mounting.

      Features

      1.Adopt 32 bit ARM processor
      2.Support 3-in-1 RS-232/RS-485/RS-422 serial interface
      3.Support 10/100M
      4.Support 300bps-115.2Kbps
      5.Support TCP, UDP, ARP, ICMP, HTTP and DHCP protocol
      6.Support across gateway, router communication
      7.Support standard TCP/IP SOCKET
      8.Support Windows serial interface driver mode
      9.Support Virtual serial driver access and auto connect once the network disconnect
      10.Support network and serial interface configuration mode
      11.Low consumption design
      12.Support DIN-Rail or wall mounting installation
      13.Working termperature: -40???75℃

      Specification

      LAN???
      Standard: 10Base-T???100Base-TX
      Protocol: Support TCP, UDP, APR, ICMP and DHCP protocol
      Signal: Rx+,Rx-,Tx+,Tx-
      Speed: 10/100Mbps
      Working: Full-duplex and half-duplex
      Working mode: Support Server and Client
      Transmission; 100m
      Connector: RJ45

      Serial interface:
      Serial interface number: 1 port RS-232,1 port RS-422/485
      RS-232 signal: TXD,RXD,RTS,CTS,DTR,DSR,GND
      RS-422 signal: T+???A???,T-(B),R+(A),R-(B),GND
      RS-485 signal: D+???A???,D-(B),GND
      Parity bit: None,Even,Odd,Space,Mark
      Data bit: 5bit,6bit,7bit,8bit
      Baud rate: 300bps???115200bps
      Flow control: RTS/CTS or XON/XOFF
      Direction control: RS485 side adopt ADDC technology, auto text and control data transfer direction
      Loading: RS-485/422 side support 32 nodes (customize 128 nodes) loopback
      Transmission: RS-485/422 side 1200m; RS-232 side 15m
      Interface protection: 1500W surge protection, 15KV static protection
      Interface type: RS-232 side DB9 male???RS-485/422 side 5 bit terminal block

    Yes! I am Interested

    2 port RS232 RS232/422/485 Serial Devices Servers

    REQUEST CALLBACK

    2 port RS232 RS232/422/485 Serial Devices Servers
    Approx. Rs 3,500 / Piece
    Get Best Quote

    NP302T-2D(RS-485) is an high performance, industrial grade serial to Ethernet server, it can satisfy some kinds of customer requirements in consumption, temperature, volume and handle ability. It provides 2 port RS-485/422(RS-485/422 connector: 5 bit terminal block) and 1 port 10/100Base-Tx Ethernet, can focus manage disperse serial device, master through network, easy, convenience. In application, can configure, upgrade through WEB
    Moreover, NP302T-2D(RS-485) provide strong function configuration tools based in Windows platform, it can guide user configure the device step by step, all configurations are coming true by WEB or Telnet, support cross-gateway and cross-router, user can can flexible configure IP address, server and client mode, data bag size etc.
    NP302T-2D(RS-485) adopts EMC protection design, can work in rugged environment.
    Features
    1.Support 10/100M Ethernet
    2.Support 2 Port RS-485/422
    3.Support WEB and Telnet configuration
    4.Support TCP, UDP, ARP, ICMP, DHCP and DNS protocol
    5.Support TCP Server, TCP Client, TCP Auto, UDP and
    Real COM driver working mode
    Yes! I am Interested

    E1 Converters

    REQUEST CALLBACK

    E1 Converters
    Approx. Rs 3,500 / Piece
    Get Best Quote

    Introduction:
    MODEL7211 bridge provides easy conversion from ITU-T G.703 E1 channel to Ethernet to E1 bridge converter interface of protocolEthernet to E1 Bridge protocol converter Can used widely in connecting between WAN and LAN, monitoring, etc.Ethernet to E1 Bridge protocol converter Ethernet interface is 10/100Mbps auto negotiation and can be full/half duplex. protocol converters E1 is transparent and in full rate, which can support the E1 Bridge protocol converter unframed mode, including fractional E1 per request. A pair of MODEL7211 offer a cost effective solution for using existing E1 Bridge Protocol converter leased lines for transparent protocol converters Ethernet service. Local management of the MODEL7211 protocol Converter is provided via DIP switches. Front panel LEDs monitor the G.703 link, Ethernet LAN and serial ports for status and Loss of Sync.prptocol converters MODEL7211 compact G.703 Access protocol Converter provides E1/2.048 Mbps Network Termination as well as serial or Ethernet LAN interface conversion in a standalone or rack mount package.protocol converters MODEL7211 terminates the G.703 Telco interface and protocol converts the data for transmission to a user-oriented 10/100BaseT(x) interface.
    Features:
    1.protocol converters Using E1 line transparent transfer Ethernet data
    2.protocol converters Support local clock and line clock
    3.protocol converters Support pretend random coding loop test
    4.protocol converters E1(G.703)interface support 120ohm(RJ-45)and 75ohm(BNC double coaxial)
    5.protocol converters Ethernet MAC address percolate function
    6.protocol converters Support VLAN over length data bag
    7.protocol converters Ethernet port support 10M/100M full-duplex/half-duplex

    Yes! I am Interested

    10/100M Ethernet To E1 Converter

    REQUEST CALLBACK

    10/100M Ethernet To E1 Converter
    Approx. Rs 3,500 / Piece
    Get Best Quote

    Introduction:
    MODEL7212 bridge provides easy conversion from ITU-T G.703 E1 channel to Ethernet interface of protocol converter. Can used widely in connecting between WAN and LAN, monitoring, etc. The Ethernet interface is 10/100Mbps auto negotiation and can be full/half duplex in the protocol converter. protocol converter E1 is transparent and in full rate, which can support the E1 unframed modein protocol converter, including fractional E1 per request of protocol converter. protocol converter pair of MODEL7212 offer a cost effective solution for using existing E1 leased lines for transparent Ethernet protocol converter service.protocol converter Local management of the MODEL7212 Converter is provided via DIP switches. Front panel LEDs monitor the G.703 link protocol converter Ethernet LAN and serial ports for status and Loss of Sync in protocol converter. MODEL7212 compact G.703 Access Converter provides E1/2.048 Mbps Network Termination as well as serial or Ethernet LAN interface conversion in a standalone or rack mount package of protocol converter MODEL7212 terminates the G.703 Telco interface and converts the data for transmission to a user-oriented 10/100BaseT(X) interface of protocol converter.
    Features:
    1.protocol converter Using E1 line transparent transfer Ethernet data
    2.protocol converter Support N×64Kbps(N=1~32) rate
    3.protocol converter Support local clock and line clock
    4. protocol converter Support pretend random coding loop test
    5. protocol converter E1(G.703)interface support 120ohm(RJ-45)and 75ohm(BNC double coaxial)
    6. protocol converter Ethernet MAC address percolate function
    7. protocol converter Support VLAN over length data bag
    8. protocol converter Ethernet port support 10M/100M full-duplex/half-duplex
    Yes! I am Interested

    10/100m Ethernet To E1 Converter

    REQUEST CALLBACK

    10/100m Ethernet To E1 Converter
    Approx. Rs 3,500 / Piece
    Get Best Quote

    Introduction:
    MODEL7212 bridge provides easy conversion from ITU-T G.703 E1 channel to Ethernet interface of protocol converter. Can used widely in connecting between WAN and LAN, monitoring, etc. The Ethernet interface is 10/100Mbps auto negotiation and can be full/half duplex in the protocol converter. protocol converter E1 is transparent and in full rate, which can support the E1 unframed modein protocol converter, including fractional E1 per request of protocol converter. protocol converter pair of MODEL7212 offer a cost effective solution for using existing E1 leased lines for transparent Ethernet protocol converter service.protocol converter Local management of the MODEL7212 Converter is provided via DIP switches. Front panel LEDs monitor the G.703 link protocol converter Ethernet LAN and serial ports for status and Loss of Sync in protocol converter. MODEL7212 compact G.703 Access Converter provides E1/2.048 Mbps Network Termination as well as serial or Ethernet LAN interface conversion in a standalone or rack mount package of protocol converter MODEL7212 terminates the G.703 Telco interface and converts the data for transmission to a user-oriented 10/100BaseT(X) interface of protocol converter.
    Features:
    1.protocol converter Using E1 line transparent transfer Ethernet data
    2.protocol converter Support N×64Kbps(N=1~32) rate
    3.protocol converter Support local clock and line clock
    4. protocol converter Support pretend random coding loop test
    5. protocol converter E1(G.703)interface support 120ohm(RJ-45)and 75ohm(BNC double coaxial)
    6. protocol converter Ethernet MAC address percolate function
    7. protocol converter Support VLAN over length data bag
    8. protocol converter Ethernet port support 10M/100M full-duplex/half-duplex
    Yes! I am Interested

    USB to RS-232 Converter

    REQUEST CALLBACK

    USB to RS-232 Converter
    Approx. Rs 8,000 / Piece
    Get Best Quote

    (MOOTEK)We are leading in manufacturing and supplier of Industrial Rackmount Unmanaged Ethernet Switches(22TP+2F) Chennai,Tamilnadu,India.
    Introduction:

    USB232 smart adapter cable lets PC users add an additional serial port for RS-232 connections using USB. It provides an external plug-and-play port for convenient connection of cell phones, digital cameras, modems and ISDN terminals. Just plug the serial device into the cable and the cable into the USB port. Automatic handshake is supported. No IRQs are required. This smart cable transmits up to 230 kbps with a 96 byte buffer for upstream and downstream data flow.

    •  
        Features1. Small volume, easy installation
        2. No power supply needed, plug and play 
        3. Single chip(ASIC) USB port to serial port communication,Automatic detective serial signal rate
        4. Accord USB1.1 or 2.0, EIA RS232 standard
        5. USB full-speed to 12Mbps
        6. LED indication: RXD/TXD(RS-232) Specification

        USB
        Compliance: USB1.1/2.0 compliant
        Connector: USB type A
        Speed: 12Mbps(full-speed)
        Serial interface
        Numbers of ports: 1
        Serial standards: RS-232
        Connector: DB9 male
        Serial Line protection
        ESD Protection: 15KV embedded
        Performance
        Baudrate: 300bps to 115.2Kbps
        Serial Communication Parameters
        Data Bites: 5, 6, 7, 8
        Stop Bits: 1, 1.5, 2
        Parity: None, Even, Odd, Space, Mark
        Flow Control: RTS/CTS, XON/XOFF
        FIFO: 128 bytes
        Serial Signals
        RS-232: TXD, RXD, RTS, CTS, DTR, DSR, DCD, RI, GND
        Driver Support
        Operating System: Support Windows98/ME and Windows2000/XP,Windows Server 2003/2008, Windows 7/Vista
        Physical Characteristics
        Weight: Products only: 70g
         Packaged: 120g
        Dimension: 70mm×35mm×18mm(wiring 1.5m) 
        Environment
        Working temperature: -10 to 60°C 
        Storage temperature: -25 to 85°C 
        Humidity: Relative humidity 5% to 95% 
        Power requirements
        No power supply needed, powered from USB 
        Consumption: Static consumption less than 80mA, dynamic average consumption less than 150mA

  • Minimum Order Quantity: 5 Piece
  • Yes! I am Interested

    USB to RS485/422 Converter

    REQUEST CALLBACK

    USB to RS485/422 Converter
    Approx. Rs 8,000 / Piece
    Get Best Quote

    Introduction:
    USB485 is a kind of USB to RS-485/422 industrial intelligent converter. It is the best solution for the communication between USB and RS-485/422. Compared with RS-232 to RS-485/422 converter, USB to RS-485/422 converter has many advantages.
    Features:
    1. Small volume, easy installation
    2. No power supply needed, plug and play
    3. Single chip(ASIC) USB port to serial port communication
    4. Transmit distance reach up to 1800M at the rate of 115200bps.
    5. Automatic send data control, auto distinguish and sense direction adopt data transfer
    6. Auto sense serial signal rate, zero delay automatic transmit
    Specifications:
    USB
    Compliance: USB1.1/2.0 compliant
    Connector: USB type A
    Speed: 12Mbps(Full-speed USB)
    Serial interface
    Numbers of ports: 1
    Serial standards: RS485/422
    Connector: DB9 male
    Serial Line protection
    ESD Protection: 15KV embedded
    Performance
    Baud rate: 300bps to 230400bps
    Serial Communication Parameters
    Data Bites: 5, 6, 7, 8
    Stop Bits: 1, 1.5, 2
    Parity: None, Even, Odd, Space, Mark
    Flow Control: RTS/CTS, XON/XOFF
    FIFO: 128bytes
    Serial Signals
    RS-485: D+,D-,GND
    RS-422: T+, R+, T-, R-,GND
    Loading: 32 nodes or custom 128 nodes
    Transmission: RS-485 1800M(115200bps), USB 5M
    Driver Support
    Operating System: Support Windows98/ME and Windows2000/XP,Windows Server 2003/2008, Windows 7/Vista
    Physical Characteristics
    Weight: Products only: 70g
    Packaged: 120g
    Dimension: 70mm35mm18mm(wiring 1.5m)
    Environment
    Working temperature: -10 to 60
    Storage temperature: -25 to 85
    Humidity: Relative humidity 5% to 95%
    Power requirements
    No power supply needed, powered from USB
    Consumption: Static consumption less than 80mA, dynamic average consumption less than 150mA
    Warranty: 5 years
    Approvals: FCC, CE, RoHS approvals
    Yes! I am Interested

    RS232/422/485 to Fiber Converter

    REQUEST CALLBACK

    RS232/422/485 to Fiber Converter
    Approx. Rs 3,000 / Piece
    Get Best Quote

    Introduction:
    The Model271 Series serial to fiber optic converter is equipped with a multiple interface circuit that can handle RS-232, or RS-422/485 serial interfaces and multi-mode or single- mode fiber. Model271 converters are used to extend serial transmission distance up to 2-5 km (multi-mode fiber) or up to 20-120 km (single- mode fiber). Note that the RS-232 and RS-422/485 interfaces cannot be used on the same Model271 at the same time.
    Features:
    1. Auto sense serial signal rate, zero delay automatic transmit
    2. 500Kbps the highest baud rate
    3. Supply three interface (RS232/485/422)
    4. Multi-mode 2KM, signal-mode 20~120KM
    5. Compact Size
    6. Decreases Signal interference
    7. DIN Rail or Wall-mounting

    Specification:
    RS-232/485/422
    Standard: EIA RS-232, RS-485, RS-422
    Connector: Terminal Block
    RS-232 Signals: Tx, Rx, GNG
    RS-422 Signals: T+, T-, R+, R-
    RS-485 Signals: T+, T-
    Baud rate: 0-500kbps
    ESD Protection: 15KV for all signals
    Fiber Optic
    Fiber Connector: SC, FC or ST optional
    Fiber Optic Cable Requirements
    Single-mode: 8.3/125, 8.7/125, 9/125 or 10/125m
    Multi-mode: 50/125, 62.5/125, or 100/140m
    Transmission
    Single-mode: 20, 25, 40, 60, 80, 100, 120KM optional
    Multi-mode: 2, 5KM
    Wavelength
    Single-mode: 1310nm
    Multi-mode: 850nm
    Tx Output
    Single-mode: >-5dBm
    Multi-mode: >-5 dBm
    Rx Sensitivity
    Single-mode: -25dBm
    Multi-mode: -25dBm
    Point-to-Point Transmission: Half-duplex or full-duplex
    Ring Transmission: Half-duplex
    Physical Characteristics
    Case: Iron
    Dimensions: 100*69*22mm
    Environment
    Operating Temperature: -40 to 85
    Storage Temperature: -40 to 85
    Relative Humidity: 5 to 95%
    Power Requirements
    Input Voltage: 9-36VDC
    Consumption: 120mA
    Warranty: 5 Years
    Approvals: FCC, CE, RoHS approvals
    Yes! I am Interested

    CAN To Fiber Optic Converter

    REQUEST CALLBACK

    CAN To Fiber Optic Converter
    Approx. Rs 7,000 / Piece
    Get Best Quote

    Introduction:
    MC201 is a CAN bus to fiber converter. It designs specially to deal with the short transmission distance of CAN bus, the subjection to electromagnetic interference and other issues. CAN bus transfer to fiber is able to provide the user with transparent data transmission of CAN bus to fiber. It is working in pairs, is more convenient to put the CAN signal revert to the CAN signal through fiber transmission.
    MC201 serial converter integrates an optical interface and a 2KVAC electrically isolated CAN bus interface, is able to receive/store/transmit different rates between 2 CAN network data. CAN bus interface of MC201 supports various of standard communication baud rate recommended by CiA, is capable for detecting and matching automatical baud rate and defining baud rate by user, the baud rate ranges from 2.5Kbps to 1Mbps; it can connect external termination resistors at the same time.Its single-model fiber interface can be used in high-interference environment and has concentrated energy , which is more suitable for long-distance transmission , is better to extend the network communication distance.
    MC201 adopts EMC protection design, supports wall and panel mounting. It can be used at the harsh environment from -40 to 85.
    Features:
    1.Support CAN2.0A and CAN2.0B protocol, conform to the ISO/DIS 11898
    2.Integrate1 UTD CAN interface and 1 optical interface
    3.CAN interface supports auto-detect baud rate and user-defined
    baud rate, the baud rate matches the range of 2.5k~1Mbps
    4.Support optic fiber transmit CAN network data
    5.Extend transmission distance to 15 KM
    6.CAN interface has electrical isolation protection with 2KVAC
    isolation voltage; Supports 8KV ESD protection(air discharge)
    7.Port Data Throughput: 1000fps
    8.Optional installation of external termination resistors
    9.Industrial design, IP40 protection
    10.Support DIN-Rail and wall mounting installation
    11.Working Temperature: -40~85
    Specifications:
    Fiber Interface
    Interface Type: single optical port or dual optical port, SC/ST/FC optional
    Fiber Type: single-model/multi-model
    Wavelength: 1310nm
    CAN Interface
    Standard: CAN2.0A, CAN2.0B
    CAN Signal: GND, CANL, CANH
    Baud Rate: 2.5K ~ 1000K bps
    Interface Resistor: 120ohm external Terminator optional
    Port Node: load capacity supports 110 nodes
    Interface Protection: 2KVAC isolation protection, 8KV ESD protection(air discharge)
    Interface Type: 5PIN terminals
    Transmit Distance
    CAN Interface: 40m~10Km
    Single-model Fiber: 0~15Km
    Indicator
    CAN:CAN channel status indicator
    LOS: Network error status indicator
    Power: Power indicator
    Power
    Input Voltage: 5VDC
    No-load Power: 1.385W@5VDC
    Full Power:1.310W@5VDC
    Mechanical Structure
    ShellIP40 protection grade, high-strength metal casing
    Installation: Wall-mount and Panel-mount
    Weight: 237g
    Size(H*W*L): 22mm69mm10mm
    Working Environment
    Working Temperature: -40~85
    Storage Temperature: -40~85
    Industry Standard
    EMI: FCC Part 15, CISPR(EN55022) class A
    EMS: EN61000-4-2(ESD), Lece3
    Shock: IEC60068-2-27
    Free Fall: IEC60068-2-32
    Shake: IEC60068-2-6
    Warranty Period: 5 years
    Approvals CE, FCC, RoHS, UL5
    Yes! I am Interested

    RS232/485/422 to Fiber Optic Converter

    REQUEST CALLBACK

    RS232/485/422 to Fiber Optic Converter
    Approx. Rs 3,000 / Piece
    Get Best Quote

    Introduction:
    Model277 is one kind can offer RS-232/485/422 serial port carry transparent optical fiber modem of transmission to get end to user, no need patch cords set up, switch over automatically, and can detect and examine the signal speed automatically, zero delays time to transmit automatically. Model277 adopt optic fiber transmit, have isolate protection, data privacy is fine, working steady, data, such threats to communication equipment as the wave is welled up and interfered with electromagnetically that the effective one has prevented the abominable environment from being struck by lightning, can work in the abominable and dangerous environment reliably.
    Can be used in occasions such as various industrial control, course controlling, traffic controlling and intellectual district , especially suit the bank, electricity and interfering with environment department and system with the special requirement electromagnetically.
    Features:
    1. Extend RS-232/485/422 transmission up to 120Km with single-mode
    2. Transmit asynchronously, point to point, speed reach 500Kbps
    3. Examine signal speed automatically, zero delay time
    4. Plug-and-Play(hot-pluggable, data format auto-sensing & self-adjusting)
    5. Support RS-232/485/422 interface type, but only one RS-232/ RS-485/ RS-422 port can be connected at a given time
    6. 9~36VDC power supply input(2 bit terminal block)

    Specifications:
    RS-232/485/422
    Standards: EIA RS-232C, RS-485, RS422 standard
    RS-232 signal: OUT(TX), IN(RX), GND
    RS-422 signal: T+, T-, R+, R-, GND
    RS-485 signal: D+, D-, GND
    Working mode: Asynchronism, point to point or multi point, 2 wire half-duplex,4 wire full duplex
    Baud rate:0~115.2Kbps, auto test serial signal rate detect signal speed automatically, zero delay time
    Transfer distance: RS-485/422 side:1.2Km(9600bps)
    RS-232 side: no less than 5m
    Max number of drops: 128 nodes(RS-485/422)
    Port protect: 600W surge protection
    15KV ESD protection
    Fiber Optic
    Connectors: SC, FC or ST, optional
    Fiber optic cables: Single Mode:8.3/125,8.7/125,9/125 or 10/125 um
    Muti-Mode:50/125,62.5/125 or 100/125 um
    Transmission: 20, 40,60,80,100, 120km(SM),
    2km(MM) optional
    Wavelength:850nm,1310nm,1550nm
    Power
    Power input: 936VDC power input(2 bit terminal block)
    Consumption: 120mA
    Environment
    Operating temperature: -40C to 85C
    Storage temperature: -40C to 85C
    Humidity: 5% to 95%(no condensation)
    Appearance
    Dimensions: 100.0mm69.0mm22.0mm
    Material: Iron(shell)
    Color: White
    Weight: 230g
    Warranty: 5 years
    Approvals: FCC, CE, RoHS approvals
    Yes! I am Interested

    RS232 to Fiber Converter

    REQUEST CALLBACK

    RS232 to Fiber Converter
    Approx. Rs 3,000 / Piece
    Get Best Quote

    Introduction:
    Model277/A is one kind can offer RS-232 serial port carry transparent optical fiber modem of transmission to get end to user, it is the best choice to connect RTU to HOST or SCADA controller. Model277/A adopt optic fiber transmit, have isolate protection, data privacy is fine, working steady, data, such threats to communication equipment as the wave is welled up and interfered with electromagnetically that the effective one has prevented the abominable environment from being struck by lightning, can work in the abominable and dangerous environment reliably.
    Can be used in occasions such as various industrial control, course controlling, traffic controlling and intellectual district , especially suit the bank, electricity and interfering with environment department and system with the special requirement electromagnetically.
    Features:
    1. Extend RS-232 transmission up to 120Km with single-mode
    2. Transmit asynchronously, point to point, speed reach 120Kbps
    3. Plug-and-Play(hot-pluggable, data format auto-sensing & self-adjusting)
    4. 600W surge protection,15KV ESD protection
    5. Power External 5VDC
    Specifications:
    RS-232
    Standards: EIA RS-232C standard
    RS-232 signal: OUT(TX), IN(RX), GND
    Baud rate: 0~115.2Kbps, auto test serial signal rate detect signal speed automatically, zero delay time
    Transfer distance: no less than 5m
    Port protect: 600W surge protection
    15KV ESD protection
    Fiber Optic
    Connectors: SC, FC or ST, optional
    Fiber optic cables: Single Mode:8.3/125,8.7/125,9/125 or 10/125 um
    Muti-Mode:50/125,62.5/125 or 100/125 um
    Transmission: 20, 40,60,80, 100, 120km(SM),
    2 km(MM) optional
    Wavelength: 850nm, 1310nm,1550nm
    Power
    Power input: Power External 5VDC
    Consumption: 120mA
    Environment
    Operating temperature: -40C to 85C
    Storage temperature: -40C to 85C
    Humidity: 5% to 95%(no condensation)
    Appearance
    Dimensions: 94.071.026.0mm(power external)
    Material: Iron(shell)
    Color: White
    Weight: 230g(power external), 260g(power internal)
    Warranty: 5 years
    Approvals: FCC, CE, RoHS approvals
    Yes! I am Interested

    Isolation RS232 to RS485/422 Converter

    REQUEST CALLBACK

    Isolation RS232 to RS485/422 Converter
    Approx. Rs 8,000 / Piece
    Get Best Quote

    Introduction:
    Model485P is a high performance, more function RS-232/485/422 interface converter. The product configure out connect power, optic-electrical isolation more than 2.5KV. Have small volume, far transmission distance, high rate, steadily performance and so on. It is abroad used in industry control system, It is an interface convert product that have good between performance to price. Adopt itself adapt interface technique, no use for setup switch.
    Features:
    1. 9VDC power input, 2500V optical isolation
    2. Plug-and-Play(hot-pluggable, data format auto-sensing & self-adjusting)
    3. Data direction auto-turnaround, no flow control is necessary
    4. 1500W surge protection, 15KV ESD protection
    5. 1800m transfer distance (115200bps)
    6. RS-485/RS-422 connector RJ45, DB9M or 5 bit terminal block

    Specification:
    Standards: EIA RS-232C, RS-485, RS422 standard
    RS-232 signal: TX, RX, GND
    RS-422 signal: T+, T-, R+, R-, GND
    RS-485 signal: D+, D-, GND
    Working mode: Asynchronism, point to point or multi point, 2 wire half-duplex,4 wire full duplex
    Baud rate: 300~115200bps, auto test serial signal rate detect signal speed automatically, zero delay time
    Flow control: Data direction auto-turnaround, no flow control is required
    Transfer distance: RS-485/422 side:1.8Km,115200bps
    RS-232 side: no less than 5m
    Max number of drops: 128 nodes
    Optical isolation: 2500V
    Port protect: 1500W surge protection,15KV ESD protection
    Power
    Power input: 9VDC power input
    Consumption: Static less than 120mA, dynamic less than 350mA
    Environment
    Operating temperature: -40C to 85C
    Storage temperature: -40C to 85C
    Humidity: 5% to 95%(no condensation)
    Appearance
    Dimensions: 93.0mm62.4mm22.0mm
    Material: Iron(shell)
    Color: White
    Weight: 200g
    Warranty: 5 years
    Approvals: FCC, CE, RoHS approvals
    Yes! I am Interested

    TTL to RS485 Converter

    REQUEST CALLBACK

    TTL to RS485 Converter
    Approx. Rs 3,000 / Piece
    Get Best Quote

    Introduction:
    TTL-485-5P is a bi-directional port powered RS-485 to 5V TTL converter in a 9 pin format. It can convert any standard full duplex RS-485 port to a 5V TTL signal and vice versa. The unit is powered from the RS-485 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the TTL driver when data is present on the RS-485 side making the device plug-and-play, requiring no software drivers. The TTL-485-5P has a DB9 male connector on the RS485 side or 5-way terminal block and either a DB9 male connector or 5-way terminal block on the TTL side. Separate terminal block is included in package.
    Features:
    1.Port Powered: 5VDC external power is necessary
    2.Data Direction, auto-turnaround, no flow control is necessary
    3.Plug-and-Play (Device is hot-pluggable)
    4.Built-in surge protection, static protection and circuit protection

    Specifications:
    Standards: EIA RS-485 standard
    RS-485 signal: D+, D-, GND
    TTL signal: IN, OUT, GND
    Baud rate: 300~115200bps
    Transfer distance: 5V TTL side: 3m
    RS-485 side: 1.2Km
    Connectors: RS-485 Side: DB9 Male or 5 Way Terminal Block
    5V TTL Side: DB9 Male or 5 Way Terminal Block
    Port protect: 600W surge protection, 15KV ESD protection
    Power
    Power: 5V external power
    Environment
    Operating temperature: -10C to 60C
    Storage temperature: -40C to 85C
    Humidity: 5% to 95%(no condensation)
    Appearance
    Dimensions: 62.8mm33.8mm17.8mm
    99.8mm34.1mm17.6mm (with terminal block)
    Weight: 24g (with terminal block: 50g)
    Warranty: 5 years
    Approvals: FCC, CE, RoHS approvals
    Yes! I am Interested

    USB to RS232/485/422 Converter With Isolation

    REQUEST CALLBACK

    USB to RS232/485/422 Converter With Isolation
    Approx. Rs 8,000 / Piece
    Get Best Quote

    Introduction:
    USB232/485/422 is kind of industrial USB to RS-232/485/422 converter, plug and plag, 9-48VDC external power supply or USB power supply or both of them, it support DIN-Rail and wall mounting installation, can support latest operation system, wide working temperature, 2KVAC isolation protect, easy using for your projects.
    Features:
    1.Convert USB to 1 RS-232 or RS-485 or RS-422
    2.Low CPU occupation rate, steadily performance
    3.RS-485/422 can establish at most 32 nodes
    4.RS-485/422 transmit distance can reach up to 1200m
    5.Serial port support 2KVAC isolation protect
    6.Auto sense serial signal rate, band rate: 300115200bps
    7.Industrial grade design, IP30 degree of protection
    8.No fan, low consumption design
    9.Plug and play, 9-48VDC external power supply or USB power supply or both of them
    10.Storage temperature: -4085; Humidity: Relative humidity 5% to 95%
    Specifications:
    Communication parameter
    Serial No.: 1 RS-232/485/422
    USB signal: VCC, D+,D-,GND
    RS-485 signal: D+, D-
    RS-422 signal: T+, T-, R+, R-
    RS-232 signal: DCD, RXD, TXD, DTR, GND, DSR, RTS, CTS
    Parity: None, Even, Odd, Space, Mark
    Data bites: 7bit, 8bit
    Stop bites: 1bit, 2bit
    Band rate: 300bps115200bps
    Flow control: Data direction auto-turnaround, no flow control is required
    Loading: RS-485/422 side 32 nodes
    Transfer distance: RS-485/422 side 1200m, RS-232 side 15m, USB side: 5m
    Interface
    USB port: USB A type female
    RS-232: DB9 male
    RS-485/422: 5 bits 5.08mm terminal block
    Serial protection: RS-485/422: 2KVAC isolation protection, 8KV static protection
    Power supply: 8KV static protection
    LED indicator
    Power indicator: PWR
    Serial send data indicator: TX
    Serial receive data indicator: RX
    Power supply
    Input voltage: 12VDC (9~48VDC)
    No-load power consumption: 0.348W@12VDC
    Full-load power consumption: 0.384W@12VDC
    Mechanical:
    Shell: IP30 degree of protection, metal shell
    Weight: 226g
    Dimension(L*W*H): 100mm69mm22mm
    Working environment
    Working temperature: -4085
    Storage temperature: -4085
    Humidity: relative 5%95%(non-condensing)
    Standard
    EMS: EN61000-4-2 (ESD), Level 2
    Shock: IEC 60068-2-27
    Free fall: IEC 60068-2-32
    Vibration: IEC 60068-2-6
    Warranty
    Warranty time: 5 years
    Certification
    CE, FCC, RoHS, UL508(pending)
  • Minimum Order Quantity: 5 Piece
  • Yes! I am Interested

    RS485/422 to Fiber Optic Converter

    REQUEST CALLBACK

    RS485/422 to Fiber Optic Converter
    Approx. Rs 8,000 / Piece
    Get Best Quote

    Introduction:
    Model277/B is one kind can offer RS-485/422 serial port carry transparent optical fiber modem of transmission to get end to user, no need patch cords set up, switch over automatically, and can detect and examine the signal speed automatically, zero delays time to transmit automatically. Model277/B adopt optic fiber transmit, have isolate protection, data privacy is fine, working steady, data, such threats to communication equipment as the wave is welled up and interfered with electromagnetically that the effective one has prevented the abominable environment from being struck by lightning, can work in the abominable and dangerous environment reliably.
    Can be used in occasions such as various industrial control, course controlling, traffic controlling and intellectual district , especially suit the bank, electricity and interfering with environment department and system with the special requirement electromagnetically.
    Features:
    1. Extend RS-485/422 transmission up to 120Km with single-mode
    2. Transmit asynchronously, point to point, speed reach 500Kbps
    3. Examine signal speed automatically, zero delay time
    4. Plug-and-Play(hot-pluggable, data format auto-sensing & self-adjusting)
    5. Power External 5VDC
    6. 600W surge protection, 15KV ESD protection

    Specifications:
    RS-485/422
    Standards: EIA RS-485, RS422 standard
    RS-422 signal: T+, T-, R+, R-, GND
    RS-485 signal: D+, D-, GND
    Working mode: Asynchronism, point to point or multi point, 2 wire half-duplex,4 wire full duplex
    Baud rate: 300~500Kbps, auto test serial signal rate detect signal speed automatically, zero delay time
    Transfer distance: RS-485/422 side:1.2Km(9600bps)
    Max number of drops: 128 nodes(RS-485/422)
    Port protect: 600W surge protection
    15KV ESD protection
    Fiber Optic
    Connectors: SC, FC or ST, optional
    Fiber optic cables: Single Mode:8.3/125,8.7/125,9/125 or 10/125 um
    Muti-Mode:50/125,62.5/125 or 100/125 um
    Transmission: 20, 40,60,80, 120km(SM),
    2 km(MM) optional
    Wavelength:850nm,1310nm,1550nm
    Power
    Power input: Power External 5VDC
    Consumption: 120mA
    Environment
    Operating temperature: -10C to 60C
    Storage temperature: -40C to 85C
    Humidity: 5% to 95%(no condensation)
    Appearance
    Dimensions: 94.071.026.0mm(power external)
    Material: Iron(shell)
    Color: White
    Weight: 230g(power external)
    Warranty: 5 years
    Approvals: FCC, CE, RoHS approvals
  • Minimum Order Quantity: 5 Piece
  • Yes! I am Interested

    USB to 4-port RS232 Converter

    REQUEST CALLBACK

    USB to 4-port RS232 Converter
    Approx. Rs 3,400 / Piece
    Get Best Quote

    Introduction:
    A quick and easy way to expand your PC's port count and to adapt serial devices to your USB PC. Edge port USB-to-Serial converters are intelligent expansion units that connect to a PC, thin client or server via a USB port. USB4232 provides four RS-232 serial ports, is compliant with USB 1.1 and 2.0 specifications, and meet the 480 Mbps high-speed requirement of Hi-Speed USB 2.0. Using your computers USB ports to connect serial devices reduces the total cost of ownership, investment in hardware, and long term management and integration costs.
    Features:
    1. USB to 4-port RS-232 converters
    2. Single chip(ASIC) USB port to serial port communication
    3. Support Windows98/ME and Windows2000/XP,Windows Server 2003/2008, Windows 7/Vista
    4. Support powered from USB or 5VDC external power input
    5. No IRQ, I/O Address
    6. Support USB2.0, baud rate can reach up to 12Mbps
    7. 15KV ESD protection
    Specifications:
    USB
    Compliance: USB1.1/2.0 compliant
    USB signal: VCC, DATA+,DATA-,GND
    Speed: 480Mbps(high-speed), 12Mbps(full-speed)
    Connector for External Antenna: USB type B female
    RS-232
    Standards: EIA RS-232C
    Number of Ports: 4
    Connectors: DB9 male
    RS-232 signal: TXD, RXD, RTS, CTS, DTR, DSR, DCD, RI, GND
    Working mode: Asynchronous, point to point
    Baud rate: 300~115.2Kbps
    Parity: None, Even, Odd, Space, Mark
    Data bits: 7, 8
    Stop bits: 1, 2
    Flow control: RTS/CTS, XON/XOFF
    Interface protection: 1500W surge protection, 15KV ESD protection
    Driver Support
    Operating System: Support Windows98/ME and Windows2000/XP,Windows Server 2003/2008, Windows 7/Vista
    Power
    Power input: 5VDC power input
    Consumption: 300mA
    Environment
    Operating temperature: -10C to 60C
    Storage temperature: -40C to 85C
    Humidity: 5% to 95%(no condensation)
    Appearance
    Dimensions: 160.0mm94.0mm28.0mm
    Material: Iron(shell)
    Color: White
    Weight: 500g
    Warranty: 5 years
    Approvals: FCC, CE, RoHS approvals
    Yes! I am Interested

    Port-powered RS232 to RS485 Converter

    REQUEST CALLBACK

    Port-powered RS232 to RS485 Converter
    Approx. Rs 3,500 / Piece
    Get Best Quote

    Introduction:
    The TLC485 is a bi-directional port-powered RS232 to RS485 converter. It can convert any standard full duplex RS232C port to any two-wire balanced half duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers.
    Features:
    1. Port-powered from RS232 port (TXD,RTS,DTR): no external power is necessary
    2. Convert RS-232(TXD,RXD signal) to RS-485 signal
    3. Plug-and-Play (hot-pluggable, Data format Auto-sensing & Self-adjusting)
    4. Data direction auto-turnaround, no flow control is required
    5. Point to multi point, support 128 nodes loopback
    Specification:
    Standards: EIA RS-232C, RS-485 standard
    RS-232 signal: TX, RX, GND
    RS-485 signal: D+, D-, GND
    Working mode: Asynchronism, point to point, 4 wire full-duplex
    Transfer rate: 300~115200bps, auto test serial signal rate detect signal speed automatically, zero delay time
    Flow control: Data direction auto-turnaround, no flow control is required
    Max number of drops: 128 nodes
    Transfer distance: RS-485side: 1.2Km
    RS-232 side: no less than 5m
    Port protect: 1500W surge protection,15KV ESD protection
    Connector: RS-232 side DB9 female
    RS-485 side DB9M( DB9F to 3 bit terminal block)
    Power
    Power input: No power supply need, powered from RS-232 port TXD, RTS, DTR
    Consumption: Static less than 10mA, dynamic less than 40mA
    Environment
    Operating temperature: -20C to 60C
    Storage temperature: -40C to 85C
    Humidity: 5% to 95%(no condensation)
    Appearance
    Dimensions: 90.0mm33.0mm16.5mm(DB9)
    Material: Plastic(shell)
    Weight: 40g
    Warranty: 5 years
    Approvals: FCC, CE, RoHS approvals
    Yes! I am Interested

     
    X


    Call Us:  +91-8071807813
    Mootek Technologies
    D. Krish (Proprietor)
    N. No. 10, O. No. 14, 2nd Floor, Aranganathan Subway Road Kaveri Nagar, Saidapet, Saidapet Kaveri Nagar,
    Chennai - 600015, Tamil Nadu, India
    Contact via E-mail
    Contact via SMS



    Home  |   Profile   |  Our Product Range  |  Site Map  |   Contact Us   |   Mobile Site

    © Mootek Technologies. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Mootek Technologies