Send Email
Send SMS
Search
Mootek Technologies
Mootek Technologies


Serial Port Converter

We are leading in manufacturing and supplier of Serial port Converters in Chennai, Tamilnadu, India.

We have Wide range Industrialserial port converters
RS-232/485/422 converters
  • RS232 to RS485 converter -port powered-DB9.
  • RS232 to RS485 converter -port powered-DB9.
  • Port-powered RS232 to RS485/422 converter.
  • RS232 to RS485/422 converter, 2500V isolation, 9VDC, 1800m.
  • Industrial RS232 to RS485 converter, port-powered, 2500V isolation.
  • 2-in-1 RS232 to RS485/422 converter, RS485/422 repeater, 9-36VDC, 3000V isolation.
USB TO RS232/485/422 HUB
  • USB to RS232 converter, USB2.0 .
  • USB to RS485/422 converter, USB2.0 .
  • USB to 4 port RS232 converter, USB2.0 .
  • USB to 4 port RS485/422 converter, USB2.0 .
R232/485/422/RJ45/BNC protector
  • DB9 serial, RXD, TXD, GND 3 line, 5KV isolation.
  • RS485 lightning protection, 4500V protection capability.
  • BNC video lightning protection, 4500V protection capability.
  • Ethernet RJ45lightning protection, 4500V protection capability.
RS232 repeater
  • Extend RS232 serial RXD, TXD, RTS, CTS, DTR, DSR signal 1.2KM, DB9.

RS232 to RS422 Converter

REQUEST CALLBACK

RS232 to RS422 Converter
Approx. Rs 3,499 / Piece
Get Best Quote

We are leading in manufacturing and supplier of RS232 to RS422 Converter Port Powered in Chennai,Tamilnadu,India.
Introduction:
Model : SW485CThe SW485C is an industrial grade bi-directional port-powered RS232 to RS485 or RS422 converter in a 9 pin format. It can convert any standard full duplex RS232 port to any two-wire balanced half duplex RS485 port or four-wire balanced full duplex RS485 or RS422 port. In simple terms, it will convert any RS232 signal to a RS485 or RS422 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485/RS422 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers. The SW485C has a DB9 female connector on the RS232 side and either a DB9 male connector or 5 bit terminal block on the RS485/RS422 side.

Features1. Plug-and-Play, small volume, easy installation 
2. Port-powered, high efficiency obtain electricity, can also worked on 3 lines
3. RS-232 to RS-485 or RS-232 to RS-422
4. Lowest consumption
5. Automatic send data control, auto distinguish and sense direction adopt data transfer
6. Auto sense serial signal rate, zero delay automatic transmit

Specification

Standards: EIA RS-232C, RS-485,RS-422 standard
RS-232 signal: TX, RX, GND
RS-422 signal: T+, T-, R+, R-, GND
RS-485 signal: D+, D-, GND
Working mode: Asynchronism, point to point or multi point, 2 wire half-duplex,4 wire full duplex
Baud rate: 300~115200bps, auto test serial signal rate detect signal speed automatically, zero delay time
Flow control: Data direction auto-turnaround, no flow control is required
Transfer distance: RS-485/422 side:1.2Km,115200bps
RS-232 side: no less than 5m
Max number of drops: 128 nodes
Optical isolation: 2500V
Port protect: 1500W surge protection,15KV ESD protection
Connector: RS-232 side DB9 female
                 RS-485/422 side DB9M( DB9F to 5 bit terminal block)
Power
Power input: No power supply need, powered from TXD, RTS,DTR
Consumption: Static less than 10mA, dynamic less than 40mA
Environment
Operating temperature: -40°C to 85°C 
Storage temperature: -40°C to 85°C
Humidity: 5% to 95%(no condensation)
Appearance
Dimensions: 95.0mm×33.0mm×16.5mm      
Material: Plastic(shell) 
Weight: 50g
Warranty: 3 years

Approvals: FCC,CE,RoHS approvals 
 
  • Item Code: MT-TLC422
  • Minimum Order Quantity: 1 Piece
  • Yes! I am Interested

    RS232 to RS485 Converter Port Powered

    REQUEST CALLBACK

    RS232 to RS485 Converter Port Powered
    Approx. Rs 8,000 / Unit
    Get Best Quote

    We are leading in manufacturing and supplier of RS232 to RS485 Converter Port Powered in Chennai,Tamilnadu,India.
    Introduction:
    The TLC485 is a bi-directional port-powered RS232 to RS485 converter. It can convert any standard full duplex RS232C port to any two-wire balanced half duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers.
    Features:
    1. Port-powered from RS232 port (TXD,RTS,DTR): no external power is necessary
    2. Convert RS-232(TXD,RXD signal) to RS-485 signal
    3. Plug-and-Play (hot-pluggable, Data format Auto-sensing & Self-adjusting)
    4. Data direction auto-turnaround, no flow control is required
    5. Point to multi point, support 128 nodes loopback
    Specification:
    Standards: EIA RS-232C, RS-485 standard
    RS-232 signal: TX, RX, GND
    RS-485 signal: D+, D-, GND
    Working mode: Asynchronism, point to point, 4 wire full-duplex
    Transfer rate: 300~115200bps, auto test serial signal rate detect signal speed automatically, zero delay time
    Flow control: Data direction auto-turnaround, no flow control is required
    Max number of drops: 128 nodes
    Transfer distance: RS-485side: 1.2Km
    RS-232 side: no less than 5m
    Port protect: 1500W surge protection,15KV ESD protection
    Connector: RS-232 side DB9 female
    RS-485 side DB9M( DB9F to 3 bit terminal block)
    Power
    Power input: No power supply need, powered from RS-232 port TXD, RTS, DTR Consumption: Static less than 10mA, dynamic less than 40mA

    Environment
    Operating temperature: -20°C to 60°C
    Storage temperature: -40°C to 85°C
    Humidity: 5% to 95%(no condensation)
    Appearance
    Dimensions: 90.0mm×33.0mm×16.5mm(DB9)
    Material: Plastic(shell)
    Weight: 40g
    Warranty: 5 years
    Approvals: FCC, CE, RoHS approvals

  • Item Code: TLC485
  • Yes! I am Interested

    Serial To Fiber Converter

    REQUEST CALLBACK

    Serial To Fiber Converter
    Approx. Rs 8,000 / Unit
    Get Best Quote

    We are leading in manufacturing and supplier of RS232 Isolation Protector in Chennai,Tamilnadu,India.
    Introduction:
    • Product Details

    HJ-485/422/232 is a RS-232/RS-485/RS-422 serial fiber MODEM. Uses industry-standard design, its wall-mounted design support DIN-rail standard rail mounting, easy to install. HJ-485 / 422/232 serial RS-232/RS-485/RS-422 able to provide end to end transparent transmission due to use of optical fiber transmission, there is no electrical conductivity, which has a strong anti-interference ability, not effected by high voltage and lightning.

    Product Features :

    •  can be HJ-485/422/232 MM or HJ-485/422/232 SM
    •   zero delay automatic forwarding
    •   Support RS232/485/422
    •   automatically detect serial rate, identification and control Data transfer direction
    •   Operating wavelength: 1310nm
    • maximum communication rate 500Kbps
    •   multimode ST / SC interface Optional, single mode FC / SC / ST Interface optional
    • multimode communication up to 2 km, singlemode reach 20/40/60/80 km
    •  interface provides 1500W surge protection, 15KV ESD protection
    • internal or external power supply optional

    Communication:

    Standard

    Comply with EIA RS-232, RS-485 standard

    RS-232 signals

    IN, OUT, GND

    RS-485 signal

    D +, D-, GND

    RS-422 signal

    R +, R-, T +, T-, GND

    Optical signal

    IN, OUT

    Work

    Asynchronous, point

    Direction control

    Using data flow control technology, automatic identification and control data transfer direction

    Baud Rate

    0-500Kbps, automatic detection signal rate

    Optical wavelength

    1310nm

    Electrical port transmission distance

    RS-232 port 15 m, RS-485/422 port 1200 m

    Optical transmission distance

    multimode 2 km, single mode 20 km

    Environmental:

    Operating Temperature

    -25 °c to 70 °c

    Storage Temperature

    -40 °c to 85 °c

    Humidity

    Relative humidity 5% to 95%

    Appearance

    Length × width × height

    100mm × 69mm × 22mm

    Shell

    Hulled

    Color

    White

    Weight

    230g

    Power supply

    Input Power

    9V ~ 40V wide voltage input

    Power consumption

    2W

  • Item Code: MODEL232I
  • Yes! I am Interested

    1 Port RS232/485/422 to Ethernet Converter

    REQUEST CALLBACK

    1 Port RS232/485/422 to Ethernet Converter
    Approx. Rs 8,000 / Unit
    Get Best Quote

    We are leading in manufacturing and supplier of Industrial RS232 to RS485 Converter in Chennai,Tamilnadu,India.
    Introduction:

    The SW485WA is an industrial grade bi-directional port-powered 2500V opto-isolated RS232 to RS485 converter in a 9 pin format. It can convert any standard full duplex RS232C port to any two-wire balanced half duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers. The SW485WA has a DB9 female connector on the RS232 side and either a DB9 male connector or 3 bit terminal block on the RS485 side.


    Features:

    1. Optical isolation effectively protects RS-232/RS-485 devices from transient surges, ground loop, and remote lightning
    2. Plug-and-Play (Device is hot-pluggable, Data format Auto-sensing & Self-adjusting)
    3. Maximum baud rate 38400bps, 1200m(9600bps)
    4. Port-powered, no external power or TXD, RTS, DTR required
    5. Data direction auto-turnaround, no flow control is required
    6. 2500V isolation, no power supply needed

    Specification:

    Standards: EIA RS-232C, RS-485, RS-422 standard
    RS-232 signal: TX, RX, GND
    RS-485 signal: D+, D-, GND
    Working mode: Asynchronism, point to point or multi point, 2 wire half-duplex
    Baud rate: 300~115200bps, auto test serial signal rate detect signal speed automatically, zero delay time
    Flow control: Data direction auto-turnaround, no flow control is required
    Transfer distance: RS-485 side: 1.2Km, 9600bps
    RS-232 side: no less than 5m
    Max number of drops: 128 nodes
    Optical isolation: 2500V
    Port protect: 1500W surge protection, 15KV ESD protection
    Connector: RS-232 side DB9 female
    RS-485 side DB9M( DB9F to 3 bit terminal block)

    Power

    Power input: No power supply need, powered from TXD, RTS,DTR
    Consumption: Static less than 10mA, dynamic less than 40mA

    Environment
    Operating temperature: -40°C to 85°C
    Storage temperature: -40°C to 85°C
    Humidity: 5% to 95%(no condensation)

    Appearance
    Dimensions: 95.0mm×33.0mm×16.5mm
    Material: Plastic(shell)
    Weight: 50g

    Warranty: 5 years
    Approvals: FCC, CE, RoHS approvals


  • Item Code: SW485WA
  • Yes! I am Interested

    2 port 10/100m Ethernet Media Converter

    REQUEST CALLBACK

    2 port 10/100m Ethernet Media Converter
    Approx. Rs 8,000 / Unit
    Get Best Quote

    Model : Model1200The Media Converter complies with IEEE802.3, IEEE802.3u, IEEE802.3x Standards. It is designed to convert data signal between 10/100 Base-TX and 100Base-FX fast Ethernet. It supports 10/100Base-TX and 100Base-FX applications. The data signal converted by such high performance media converter can be transmitted up to 120Km maximum by fiber-optical cable. The Converter is equipped one optic port and two RJ45 Jacks and one external power supply receptacle. Four LED indicators are built-in for easy diagnosing and monitoring the status of. It can be configured automatically for Full Duplex or Half Duplex operation.

      Features

      1. Accord to IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
      2. MDI/MDI-X auto negotiation, 10M/100M auto negotiation
      3. Supports full /half duplex, Point-to-point transparent transfer
      4. Power External 5VDC input
      5. Plug-and-play, easy to installation
      6. Can insert to 2U 19", 14 slots Rackmount

       Specification

      Standards: comply with IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
      RJ45 port rate: 10/100Mbps auto negotiation
      Optic port rate: 100Mbps 
      Working: Asynchronous, point to point
      Transfer distance: RJ45port: 100m
                                    Fiber optic:20,40,60,80,100,120km(SM), 2 km(MM) optional
      RJ45 port cable: UTP 5E 
      Fiber connector: SC, ST, FC optional
      Fiber optic cables: Single Mode:8.3/125,8.7/125,9/125 or 10/125 um
                                        Muti-Mode:50/125,62.5/125 um
      Wavelength:850nm,1310nm,1550nm
      Power
      Power supply: External 5VDC input
      Consumption: 4W
      Environment
      Operating temp:-20°C to 75°C
      Storage temperature: -20 to 70°C
      Operating humidity: 5% to 95%(no condensation)
      Appearance
      Dimensions: 94.0×71.0×26.0mm(external power supply)   
      Shell: Iron 
      Color: White
      Weight: 230g(external power supply)
      Warranty: 5 years
      Approvals: FCC,CE, RoHS approvals
       

  • Item Code: MODEL485P
  • Yes! I am Interested

    Isolation RS232/485/422 Converter and Repeater

    REQUEST CALLBACK

    Isolation RS232/485/422 Converter and Repeater
    Approx. Rs 3,499 / Piece
    Get Best Quote

    We are leading in manufacturing and supplier of Isolation RS232/485/422 Converter and Repeater in Chennai,Tamilnadu,India.

    Product DescriptionProducts Content: 
    SW485GI/R is a high performance, more function RS-485/RS-422 interface repeaters. The product configure out connect power, optic-electrical isolation more than 3KV. Have small volume, far transmission distance, high rate, steadily performance and so on. It is abroad used in industry control system, it is an interface convert product that have good between performances to price. Adopt itself adept interface technique, no use for setup switch 

    Features
    1. DIN-rail mount 
    2. Terminal block, 5-40VAC
    3. 3000V isolation 
    4. Transmit distance reach up to 1800M at the rate of 9. 6kbps
    5. Adopt DIPswitch setup, random switch RS-485/RS-422 interface
    6. Automatic send data control, auto distinguish and sense direction about data Transfer 
    7. Auto sense serial signal rate, zero delay automatic transmit

    Communication
    Standard Support EIA RS-485, RS-422 standard
    RS-485 signal D+, D-, GND
    RS-422 signal R+, R-, T+, T-, GND
    Working format Asynchronism, point to point or multi-point, 2 line half duplex, 4 line duplex
    Direction Automatic Send Data Control-no software drivers needs
    Band rate 300-115200bps, automatic test signal rate
    Loading Support 32 port loop environment(or hand tailor 128 point)
    Transmission Each port 1800m(9600bps)
    Protection 600W surge protection, 15KV static electricity protection
    Opto-electronic isolation 3000V
    Connector RS-485 port 3 industrial terminal block, RS-422 port 5 industrial term ail block

    Environment
    Working temperature: -40 to 80
    Storage temperature: -40 to 85
    Humidity Relative humidity 5% to 95% 
  • Item Code: SW485-GI
  • Minimum Order Quantity: 1 Piece
  • Yes! I am Interested

    8 Ports RS-485 to Fiber Optic Converter

    REQUEST CALLBACK

    8 Ports RS-485 to Fiber Optic Converter
    Approx. Rs 4,000 / Piece
    Get Best Quote

    Model : IMF208-2F-8DIIMF208-2F-8DI(RS-485) is a high performance, unmanaged, redundancy ring RS485 to fiber converter, it used in industry application. It supports point to point two fiber port backup for each other, Fiber line(Ring) transmission, supports 8 channel RS-485(RS-485 adopted 5 bits terminal block) and 2 port 100Base-FX fiber port, meantime, 2 fiber port support redundancy ring function, network fault recovery time???20ms, it can easy and convenience manage the disperse serial device, main engine through serial port, take the intelligent redundancy for your network.
    It has high performance exchange engine, low consumption design, 2 different type power supply input and overload current and voltage protection. It special designed for industry high available data communication in power automation, industry automation, transportation, telecommunication area etc.
    It supported wall mounting and rack mount installation, easy to use for your project.

      Features1.Support 8 channel RS-485
      2.Support 2 port 100Base-FX Fiber
      3.Support dual(single) Ring line, ST/SC/FC optional    
      4.Support Redundancy ring, recovery time???20ms
      5.Support 0bps~115200bps
      6.Support Windows serial driver procedure format
      7.Provide Windows configuration tools, easy to use and install
      8.Support 3 types power supply input
      9.Industry grade design, IP30 protection level
      10.No fan, low consumption design
      11.Working temperature:-40℃-75℃
      12.Storage temperature: -40℃-85℃ SpecificationRS-485Channel of RS-485: 8RS-485 signal: D+???A???,D-(B)Parity: None, Even, Odd, Space, MarkData bits: 5bit, 6bit, 7bit, 8bitStop bits: 1bit, 1.5bit, 2bitBaud rate: 0bps???115200bpsDirection: Automatic detect data control Loading: 32 nodesTransfer distance: 1200mProtection: 1.5KVAC isolationConnection: 5 bit terminal blockConnectorRS-485: 5 bit 5.08mm separation distance terminal blockOptic fiber port: 100Base-FX, SC/FC/ST optionalTransmissionRS-485: 1200mMulti-mode: 1310nm, 2KmSingle mode: 1310nm, 20/40/60Km1550nm, 20/40/60/80/100/120KmLED indicatorCOM1~COM8 running: COM1~COM8Device running: RUNMaster/slave statues: M/SOptic fiber port (PORT1,PORT2) connection statues: LINK1, LINK2Power supplyPower supply input: 12~48VDCNo-load consumption: 3.696W@24VDCFull-load consumption: 3.792W@24VDCMechanical characteristicShell: IP30, metal caseInstallation: Wall mount or rack mountWeight: 647.4gDimension(L×W×H): 200mm×120mm×35mm EnvironmentWorking temperature: -40℃???75℃Storage temperature: -40℃???85℃ Working humidity: 5%???95%( no condensation)StandardShock: IEC 60068-2-27Free fall: IEC 60068-2-32Shake: IEC 60068-2-6 Warranty Warranty time: 3 yearsCertificationCE, FCC, RoHS, UL508(Pending)
     
  • Item Code: USB232
  • Minimum Order Quantity: 1 Piece
  • Yes! I am Interested

    USB to RS485/422 Converter

    REQUEST CALLBACK

    USB to RS485/422 Converter
    Approx. Rs 2,500 / Piece
    Get Best Quote

    We are leading in manufacturing and supplier of USB to RS485/422 Converter in Chennai,Tamilnadu,India.
    Introduction:
    USB485 is a kind of USB to RS-485/422 industrial intelligent converter. It is the best solution for the communication between USB and RS-485/422. Compared with RS-232 to RS-485/422 converter, USB to RS-485/422 converter has many advantages.

    Features:
    1. Small volume, easy installation
    2. No power supply needed, plug and play
    3. Single chip(ASIC) USB port to serial port communication
    4. Transmit distance reach up to 1800M at the rate of 115200bps.
    5. Automatic send data control, auto distinguish and sense direction adopt data transfer
    6. Auto sense serial signal rate, zero delay automatic transmit

    Specifications:
    USB

    Compliance: USB1.1/2.0 compliant
    Connector: USB type A
    Speed: 12Mbps(Full-speed USB)

    Serial interface
    Numbers of ports: 1
    Serial standards: RS485/422
    Connector: DB9 male
    Serial Line protection
    ESD Protection: 15KV embedded

    Performance
    Baud rate: 300bps to 230400bps
    Serial Communication Parameters
    Data Bites: 5, 6, 7, 8
    Stop Bits: 1, 1.5, 2
    Parity: None, Even, Odd, Space, Mark
    Flow Control: RTS/CTS, XON/XOFF
    FIFO: 128bytes

    Serial Signals
    RS-485: D+,D-,GND
    RS-422: T+, R+, T-, R-,GND
    Loading: 32 nodes or custom 128 nodes
    Transmission: RS-485 1800M(115200bps), USB 5M

    Driver Support
    Operating System: Support Windows98/ME and Windows2000/XP,Windows Server 2003/2008, Windows 7/Vista

    Physical Characteristics
    Weight: Products only: 70g
    Packaged: 120g
    Dimension: 70mm×35mm×18mm(wiring 1.5m)

    Environment
    Working temperature: -10 to 60
    Storage temperature: -25 to 85
    Humidity: Relative humidity 5% to 95%

    Power requirements
    No power supply needed, powered from USB
    Consumption: Static consumption less than 80mA, dynamic average consumption less than 150mA

    Warranty: 5 years
    Approvals: FCC, CE, RoHS approvals


  • Item Code: USB485
  • Minimum Order Quantity: 1 Piece
  • Yes! I am Interested

    USB to 4-Port RS232 Converter

    REQUEST CALLBACK

    USB to 4-Port RS232 Converter
    Approx. Rs 3,400 / Piece
    Get Best Quote

    We are leading in manufacturing and supplier of USB to 4-Port RS232 Converter in Chennai,Tamilnadu,India.
    Introduction:
    A quick and easy way to expand your PC's port count and to adapt serial devices to your USB PC. Edge port USB-to-Serial converters are intelligent expansion units that connect to a PC, thin client or server via a USB port. USB4232 provides four RS-232 serial ports, is compliant with USB 1.1 and 2.0 specifications, and meet the 480 Mbps high-speed requirement of Hi-Speed USB 2.0. Using your computer’s USB ports to connect serial devices reduces the total cost of ownership, investment in hardware, and long term management and integration costs.

    The ATC-804 is Surge Protected USB to 4 Port RS232 converter. While most PCs, Thin Clients, and Servers no longer come with RS232 Ports, the ATC-804 allows 4 to be added easily via the USB Port.

    The ATC 804 includes drivers that support Windows 95, 98, 2000, ME, 2003, XP, Vista, Windows 7, Windows 8, Windows 8 RT, CE, Linux, and OSX.

    Installation of the ATC 804 is simple using the USB Plug and Play features. Simply plug it in, follow the instructions in the install wizard and have four RS232 ports added in minutes. 

    MANUFACTURERS PART NUMBERATC-804
    POWER SUPPLYFrom USB Port or External Power
    INTERFACE(S)
    • Field: RS232
    • Support for USB 1.1 and 2.0 Plug and Play
    • USB to 4 Port RS232
    DIMENSIONS135 x 54 x 108 mm
    PRODUCT WEIGHT0.8 Kg with USB cable
    SERIAL TYPE(S)RS232
    POWER CONSUMPTION<300 mA
    INCLUDED SOFTWAREOS Virtual Serial Port Driver
    SUPPORTED OSSupports Windows 95, 95, 2000, ME, 2003, XP, Vista, Windows 7, Windows 8, Windows 8 RT, CE, Linux, and Mac OSX
    TRANSMISSION SPEEDFrom 300 bps to 460.8 Kbps
    ENCLOSUREAluminum
    CONNECTOR(S)
    • USB: USB B Female Connector
    • RS232: DB9 Male
    ISOLATIONBuilt in 600 W Surge Protection on all Serial Ports
    TEMPERATURE RANGE
    • Operating: -40°C to +70° C
    • Humidity: 10% to 90% (non-condensing)
  • Item Code: USB4-232
  • Minimum Order Quantity: 1 Piece
  • Yes! I am Interested

    Port-Powered RS-232 to RS-422 Converter

    REQUEST CALLBACK

    Port-Powered RS-232 to RS-422 Converter
    Approx. Rs 4,000 / Piece
    Get Best Quote

    We are leading in manufacturing and supplier of RS485 to USB Converters in Chennai,Tamilnadu,India.
    TLC422 is the interface converter between RS-232 and RS-422. It is powered from serial port (such as COM port of computer ), no outside power needed. Small size, long transmission distance, high rate, stable performance. It applys DB9 common serial port. It is used widely in the field of electricity, industrial automatic control, IC card billing system. It is a high quality low price data interface conversion product.
      Features1. Port-powered from RS-232 port (TXD,RTS,DTR): no external power is necessary 
      2. Convert RS-232(TXD,RXD signal) to RS-422 signal 
      3. Plug-and-Play (hot-pluggable, Data format Auto-sensing & Self-adjusting) 
      4. Data direction auto-turnaround, no flow control is required 
      5. Point to multi point, support 128 nodes loopback Specification

      Standards: EIA RS-232C, RS-422 standard
      RS-232 signal: TX, RX, GND
      RS-422 signal: T+, T-,R+,R-, GND
      Working mode: Asynchronism, point to point, 4 wire full-duplex
      Transfer rate: 300~115200bps, auto test serial signal rate detect signal speed automatically, zero delay time
      Flow control: Data direction auto-turnaround, no flow control is required
      Max number of drops: 128 nodes
      Transfer distance: RS-422 side: 1.2Km
      RS-232 side: no less than 5m
      Port protect: 1500W surge protection,15KV ESD protection
      Connector: RS-232 side DB9 female
                       RS-422 side DB9M( DB9F to 5 bit terminal block)      

      Power
      Power input: No power supply need, powered from RS-232 port TXD, RTS, DTR
      Consumption: Static less than 10mA, dynamic less than 40mA
      Environment
      Operating temperature: -20°C to 60°C 
      Storage temperature: -40°C to 85°C
      Humidity: 5% to 95%(no condensation)
      Appearance
      Dimensions: 90.0mm×33.0mm×16.5mm(DB9)
      Material: Plastic(shell) 
      Weight: 40g
      Warranty: 3 years
      Approvals: FCC, CE, RoHS approvals

       
    • Minimum Order Quantity: 1 Piece
    • Delivery Time: immediately
    • Yes! I am Interested

      1 Port Ethernet Fiber Media Converter

      REQUEST CALLBACK

      1 Port Ethernet Fiber Media Converter
      Approx. Rs 8,000 / Unit
      Get Best Quote

      • Model : Model1100Model1100, 10/100M Media Converter, provides a cost effective plug-and-play solution for long-range 10Base-T or 100Base-TX Ethernet extensions and added benefit of 10/100 auto-negotiation, making it the perfect choice when planning future upgrades of 10Base-T networks. Model1100 Ethernet Fiber converters are ultra-miniature in size and feature a shielded RJ45 Ethernet jack, SC/ST/FC style fiber-optic connections. Built-in auto-sensing capabilities enable full or half-duplex Ethernet operation with no configuration required!

        Features

        1. Accord to IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
        2. MDI/MDI-X auto negotiation, 10M/100M auto negotiation
        3. Supports full /half duplex, Point-to-point transparent transfer
        4. Power External 5VDC input
        5. Plug-and-play, easy to installation
        6. Can insert to 2U 19", 14 slots Rackmount

         Specification

        Standards: comply with IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
        RJ45 port rate: 10/100Mbps auto negotiation
        Optic port rate: 100Mbps 
        Working: Asynchronous, point to point
        Transfer distance: RJ45port: 100m
                                          Fiber optic:20,40,60,80,100,120km(SM), 2 km(MM) optional
        RJ45 port cable: UTP 5E 
        Fiber connector: SC, ST, FC optional
        Fiber optic cables: Single Mode:8.3/125,8.7/125,9/125 or 10/125 um
                                          Muti-Mode:50/125,62.5/125 um
        Wavelength:850nm,1310nm,1550nm
        Power
        Power supply: External 5VDC input
        Consumption: 4W
        Environment
        Operating temp:-10°C to 65°C
        Storage temperature: -20 to 70°C
        Operating humidity: 5% to 95%(no condensation)
        Appearance
        Dimensions: 94.0×71.0×26.0mm(external power supply)   
        Shell: Iron 
        Color: White
        Weight: 230g(external power supply)
        Warranty: 5 years
        Approvals: FCC,CE, RoHS approvals
         

    • Item Code: MODEL232D
    • Yes! I am Interested

      Managed Eight Port Hardened Industrial Ethernet Switches

      REQUEST CALLBACK

      Managed Eight Port Hardened Industrial Ethernet Switches
      Approx. Rs 4,000 / Piece
      Get Best Quote

      • RoHS compliant
      • Managed switch or economical unmanaged switch
      • 8 port switch with Six 10/100BaseT(X) (RJ45)
      • Two fiber or gigabit ethernet ports in gigabit switch
      • Broadcast storm protection
      • Support IEEE 802.3/ 802.3u/ 802.x
      • 10/100Mbps Ports - 10/100BaseT Full/Half-Duplex, MDI/MDI-X auto-detection
      • 1000BaseT - 1000BaseTX
      • Fiber Ports - 1000Base SX / LX
      • Redundant dual DC power inputs
      • Operating temperature ranges from-40 to +75C
      • Rugged high-strength plastic case
      • DIN-Rail or wall mounting ability
      • Alarm out for power failure
      FEATURES
      • RoHS compliant
      • Managed switch or economical unmanaged switch
      • 8 port ethernet switch with six 10/100BaseT(X) (RJ45)
      • Two fiber or gigabit ethernet ports
      • Broadcast storm protection
      • Support IEEE 802.3/ 802.3u/ 802.x
      • 10/100Mbps Ports - 10/100BaseT Full/Half-Duplex, MDI/MDI-X auto-detection
      • 1000BaseT - 1000BaseTX
      • Fiber Ports - 1000Base SX / LX
      • Redundant triple DC power inputs
      • Operating temperature ranges from-40 to +75C
      • Rugged high-strength plastic case industrial ethernet switch
      • DIN-Rail or wall mounting ability
      • Alarm out for power failure
      • Replace older hubs with more functionality
      DESCRIPTION

      The HES-8 series switches are hardened, inexpensive industrial quality managed and unmanaged switchs with a variety of ethernet interfaces. Standard with six 10/100BaseT interfaces and two high speed interfaces... either multi-mode fiber, single-mode fiber, or gigabit copper.

      All models have redundant input power connectors (12 to 48VDC) with reverse polarity protection for redundant power. They are ideally suited for small remote networks in industrial environments and stand alone equipment cabinets that need a small 8 port switch or 8 port network switch.

      The managed models support additional advanced features such as redundant ring with 10 ms recovery times, iA-Ring, Ring Coupling, and Dual Homing Technologies, STP/RSTP, SNMP v1/2/3, RMON, COS(802.1p), IGMP snooping, and Port based 802.1Q VLAN managements, event notification, web-based, telnet, and CLI configuration, Windows based software manager program, and more.

    • Minimum Order Quantity: 1 Piece
    • Delivery Time: immediately
    • Yes! I am Interested

      Isolated USB to RS232/485/422 Converter

      REQUEST CALLBACK

      Isolated USB to RS232/485/422 Converter
      Approx. Rs 8,000 / Piece
      Get Best Quote

      Introduction:
      USB232/485/422 is kind of industrial USB to RS-232/485/422 converter, plug and plag, 9-48VDC external power supply or USB power supply or both of them, it support DIN-Rail and wall mounting installation, can support latest operation system, wide working temperature, 2KVAC isolation protect, easy using for your projects.
      Features:
      1.Convert USB to 1 RS-232 or RS-485 or RS-422
      2.Low CPU occupation rate, steadily performance
      3.RS-485/422 can establish at most 32 nodes
      4.RS-485/422 transmit distance can reach up to 1200m
      5.Serial port support 2KVAC isolation protect
      6.Auto sense serial signal rate, band rate: 300115200bps
      7.Industrial grade design, IP30 degree of protection
      8.No fan, low consumption design
      9.Plug and play, 9-48VDC external power supply or USB power supply or both of them
      10.Storage temperature: -40℃85℃; Humidity: Relative humidity 5% to 95%
      Specifications:
      Communication parameter

      Serial No.: 1 RS-232/485/422
      USB signal: VCC, D+,D-,GND
      RS-485 signal: D+, D-
      RS-422 signal: T+, T-, R+, R-
      RS-232 signal: DCD, RXD, TXD, DTR, GND, DSR, RTS, CTS
      Parity: None, Even, Odd, Space, Mark
      Data bites: 7bit, 8bit
      Stop bites: 1bit, 2bit
      Band rate: 300bps115200bps
      Flow control: Data direction auto-turnaround, no flow control is required
      Loading: RS-485/422 side 32 nodes
      Transfer distance: RS-485/422 side 1200m, RS-232 side 15m, USB side: 5m
      Interface
      USB port: USB A type female
      RS-232: DB9 male
      RS-485/422: 5 bits 5.08mm terminal block
      Serial protection: RS-485/422: 2KVAC isolation protection, 8KV static protection
      Power supply: 8KV static protection
      LED indicator
      Power indicator: PWR
      Serial send data indicator: TX
      Serial receive data indicator: RX
      Power supply
      Input voltage: 12VDC (9~48VDC)
      No-load power consumption: 0.348W@12VDC
      Full-load power consumption: 0.384W@12VDC
      Mechanical:
      Shell: IP30 degree of protection, metal shell
      Weight: 226g
      Dimension(L*W*H): 100mm×69mm×22mm
      Working environment
      Working temperature: -4085℃
      Storage temperature: -4085℃
      Humidity: relative 5%95%(non-condensing)
      Standard
      EMS: EN61000-4-2 (ESD), Level 2
      Shock: IEC 60068-2-27
      Free fall: IEC 60068-2-32
      Vibration: IEC 60068-2-6
      Warranty
      Warranty time: 5 years
      Certification
      CE, FCC, RoHS, UL508(pending)

    • Minimum Order Quantity: 5 Piece
    • Yes! I am Interested

      RS232 or RS485 to 4 Port RS485 HUB

      REQUEST CALLBACK

      RS232 or RS485 to 4 Port RS485 HUB
      Approx. Rs 3,500 / Piece
      Get Best Quote

      (MOOTEK)We are leading in manufacturing and supplier of Industrial PCs in Chennai,Tamilnadu,India.
      Introduction:
      SW4485 is a RS-485 bus segmentation HUB, specially designed for conforming to RS-485’s large-scale system requirements under the complex electromagnetic environment. Its supporting transmission rates reach up to 115.2Kbps. It adopts transparent transmission in both directions. It can convert 1 RS-485 or RS-232 to 4 RS-485, or transparently transmit any intersected RS-485 signal to RS-485 or RS-232 on PC. Each RS-485 port of its lower position controller has reverse fault alarm and protection function, through which,the network reliability of RS-485 has been improved, and the maintenance time of network has been shortened efficiently. In order to ensure the safety and reliability of data communication, the RS-485 interfaces of SW4485 are supplied with 2KVAC isolation protection, 3 levels of ESD protection and 2 levels of electrostatic radiation protection; they can prevent lighting, common ground and radiated interference, safe and reliable, are suitable for outdoor application.
      SW4485 also provide star-RS485 BUS connection. Users can easily improve the RS-485 BUS structure, split network segment. You can design a unique and reliable RS-485 system through making reasonable use of SW4485.
      SW4485 adopts EMC protection design, supports wall-mounting and panel-mounting installation, and can be used at the harsh environment from -40℃ to 85℃.
      Features:
      1.Support two RS-232 and RS-485 PC interfaces , and 4 RS-485 lower position controller ports
      2.Support baud rate from 300bps to 115200bps
      3.Each lower machine interface can be connected to 32 standard RS-485 devices(nodes)
      4.Unique automatic circuit reverse alarm detection
      5.Have automatic transceiver conversion function with zero delay
      6.Support hot swap function, plug and play
      7.Interface has 2KVAC isolation protection, 8KV ESD protection
      (contact discharge) and 2-stage radiation immunity
      8.Industrial design, IP40 protection
      9.Support DIN-Rail and wall mounting installation
      10.Working Temperature: -40~85℃
      Specifications:
      Communication Parameter
      Interface Protocol: EIA RS-2332/485
      Interface Number: 1x RS-232
      1xRS-485
      4x RS-485 lower position
      controller interfaces.
      RS-232 signal: TxD, RxD, GND
      RS-485 signal: D+, D-, GND
      Check: None, Even, Odd, Space, Mark
      Data Bit: 5bit, 6bit, 7bit, 8bit
      Stop Bit: 1bit, 1.5bit, 2bit
      Baud Rate: 300bps~115200bps
      Direction Control: RS-485 adopts data flow to automatic control technology
      Transmission Media: twisted-pair shielded cable or UTP 485 dedicated line
      Load Capacity: RS-485: 32-node( can be customized 128 nodes)
      Port Protection: 2KVAC isolation protection, 3
      levels of ESD protection, 2
      levels of electrostatic
      radiation protection
      Transmission Distance:
      RS-485:1200m,
      RS-232 : no more than 5m
      Interface mode
      RS-232 PC port mode: DB9M Male
      RS-485 PC port mode: 3PIN terminal block
      RS-485 Lower Position Controller port mode: 10 PIN terminal block
      Indicator
      PWR: power indicator
      TXD: data delivery status indicator
      RXD: data receiving status indicator
      E1~E4: status indicator of RS-485 lower position controller interface
      Power
      Input: 5VDC
      No-load Power: 0.455W@5VDC
      Full Power: 0.485W@5VDC

    • Item Code: SW4485
    • Minimum Order Quantity: 1 Piece
    • Yes! I am Interested

      1Port SFP Slot 10/100m Ethernet Media Converter

      REQUEST CALLBACK

      1Port SFP Slot 10/100m Ethernet Media Converter
      Approx. Rs 3,999 / Piece
      Get Best Quote

      Product Description

      The Model3010 is an Ethernet media converter that converts media transmission between UTP Copper cablings and fiber SFP (Small Form-Factor Pluggable) Transceivers. The Model3010 copper-to-fiber module is available in 10/100Mbps Fast Ethernet types, allowing seamless integration between Fast Ethernet networks using unshielded twisted pair (UTP) copper cabling, and 100M fiber networks. 

      FEATURES: 
      1. Conversion between different transmission speeds and media types 
      2. Standalone and compact hardware design 
      3. Auto-negotiating Ethernet port (Speed and Half/Full Duplex) 
      4. Auto-crossover Ethernet port (Supports Auto MDI/MDI-X) 
      5. Standard open Fiber slots for SFP Transceiver 
      6. Easy Installation, Easy Troubleshooting 

      Specification: 
      Standard Compliance 
      IEEE802.3 10BASE-T 
      IEEE802.3u 100BASE-TX 
      IEEE802.3x Flow Control and Back pressure 

      Connector and Interface 
      Fiber: SFP 3.3V 
      RJ-45 Socket: CAT-5 (10/100Mbps) Twisted Pair cable Auto MDI/MDI-X and Auto-Negotiation Function Support Switch Architecture 
      Store and Forward 
      Fiber Parameters 
      Fiber Core 
      Multi-Mode (62.5/125um, 50/125um)/Single-Mode (8/125um, 10/125um) 

      Wavelength: 
      1310nm (Multi-mode ) / 1310nm (Single-mode) 

      Fiber Distance: 
      Multi-Mode Fiber (2KM) / Single-Mode Fiber (20-120 KM) 
      Power 
      Stand-alone (external adapter): DC 5V / 1A 
      Dimension 
      94.0mm*70.6mm*26.0mm, power external 
      Operation Environment 
      Operating temperature: -10oC ~ 60oC 
      Storage temperature: - 40oC ~ 85oC 
      Operating humidity: 10% ~ 90%, non-condensing 
      Certifications 
      EMC 
      FCC Part15 (Class A) 
      CE EMC (Class A) 
      Safety 
      CE, FCC

    • Item Code: USB8485I
    • Minimum Order Quantity: 1 Piece
    • Yes! I am Interested

      USB to 4- Port RS-232 Converter

      REQUEST CALLBACK

      USB to 4- Port RS-232 Converter
      Approx. Rs 8,000 / Unit
      Get Best Quote

      Product Description:

      The MT-804 is an Surge Protection USB to 4-Port RS-232 converter that is designed for PC, thin client, or server to provide instant COM port expansion via the Universal Serial Bus (USB). Supports Windows 95/98/Me, 2000, 2003, XP, Vista,Win7, CE, Linux.

      Product Features:

      1.Computer interface: USB V1.1 2.0 Plug and Play.

      2.Operational system virtual serial port driver.

      3.USB to 4-Port RS-232 serial Supports Windows 95/98/Me, 2000, 2003, XP, Vista,Win7, CE, Linux ,MAC.
      4.Field Interfaces: RS-232

      5.Transmission rate: from 300 bps to 460.8Kbps.

      6.Power: From the USB port or external power.

      7.Consumption: <300 mA.

      8.RS-232 protection: +15KV ESD. 600W surge protection.

      9.USB connection: USB B Female connector.

      10.RS-232 connector: DB9 male.

      11.Aluminum enclosure dimensions: 135 x54 x 108 mm

      12.Weight: 0.8Kg with USB cable

      13.Operating environment: -40 to 70°C, 10 to 90% relative humidity, non-condensing.

       

    • Pay Mode Terms: T/T (Bank Transfer)
    • Yes! I am Interested

      14 Slots Ethernet Media Converter Rack

      REQUEST CALLBACK

      14 Slots Ethernet Media Converter Rack
      Approx. Rs 4,000 / Piece
      Get Best Quote

      Model : RACK2000ARACK2000A for Media converter adapt integration management media converter Rack in machine room. Each Rack have 14 insert slots, can insert 1-14 different media converters. Redundant Power Supply, support hot-swappable, provide credibility, high effect and economic solutions for network system.

        Features

        1.Adopt insert-draw design, Easy to load and unload, Plug-and-play, support hot-swappable
        2. 19 inch 2U, easy to install
        3. Each Rack have 14 insert slots, can insert 1-14 different media converters, high capability, easy to upgrade
        4. Full aluminums metal shell, high shield, high anti-jamming
        5. Adopt auto-adapt technology. Do not adjust electrics and optics when installation
        6. Redundant Power Supply, Low consumption, and credibility 
        7. Full working indicator light, easy to maintenance
        8. Average no MTBF is up to 50 thousands, accord to telecom standard

         Specification

        Parameter
        Working Temperature???0°C to 50°C 
        Storage Temperature???-40°C to 85°C 
        Relative Humidity???5%~95%
        Dimension???482.6mm×350mm×88mm(L×W×H) 
        19 Inch 2U
        Power supply Require  
        Input???AC  100~260V,50~60HZ, or DC -48V
        Out put???DC +5V 
        Consumption??????60W
        Wave???≤50mv
        Noise???≤50mv
        Warranty: 5 years
        Approvals: FCC, CE, RoHS approvals

    • Minimum Order Quantity: 1 Piece
    • Yes! I am Interested

      RS232/485/422 to Fiber Optic Converter

      REQUEST CALLBACK

      RS232/485/422 to Fiber Optic Converter
      Approx. Rs 6,300 / Unit
      Get Best Quote

      The Model271 Series serial to fiber optic converter is equipped with a multiple interface circuit that can handle RS-232, or RS-422/485 serial interfaces and multi-mode or single- mode fiber. Model271 converters are used to extend serial transmission distance up to 2-5 km (multi-mode fiber) or up to 20-120 km (single- mode fiber). Note that the RS-232 and RS-422/485 interfaces cannot be used on the same Model271 at the same time.
        Features1.Auto sense serial signal rate, zero delay automatic transmit2.500Kbps the highest baud rate3.Supply three interface (RS232/485/422)4. Multi-mode 2KM, signal-mode 20~120KM5.Compact Size6.Decreases Signal interference7.DIN Rail or Wall-mounting SpecificationRS-232/485/422 Standard: EIA RS-232, RS-485, RS-422Connector: Terminal BlockRS-232 Signals: Tx, Rx, GNGRS-422 Signals: T+, T-, R+, R-RS-485 Signals: T+, T-Baud rate: 0-500kbpsESD Protection: 15KV for all signalsFiber OpticFiber Connector: SC, FC or ST optionalFiber Optic Cable RequirementsSingle-mode: 8.3/125, 8.7/125, 9/125 or 10/125μmMulti-mode: 50/125, 62.5/125, or 100/140μmTransmissionSingle-mode: 20, 25, 40, 60, 80, 100, 120KM optionalMulti-mode: 2, 5KMWavelengthSingle-mode: 1310nmMulti-mode: 850nmTx OutputSingle-mode: >-5dBmMulti-mode: >-5 dBmRx SensitivitySingle-mode: -25dBmMulti-mode: -25dBmPoint-to-Point Transmission: Half-duplex or full-duplexRing Transmission: Half-duplexPhysical CharacteristicsCase: IronDimensions: 100*69*22mmEnvironmentOperating Temperature: -40℃ to 85℃Storage Temperature: -40℃ to 85℃Relative Humidity: 5 to 95%Power RequirementsInput Voltage: 9-36VDCConsumption: 120mAWarranty: 5 YearsApprovals: FCC, CE, RoHS approvals
       
      Yes! I am Interested

      Serial Port Converter- RS232/485/422 to Ethernet Converter

      REQUEST CALLBACK

      Serial Port Converter- RS232/485/422 to Ethernet Converter
      Approx. Rs 3,999 / Piece
      Get Best Quote

      • Introduction:
        The TLC485 is a bi-directional port-powered RS232 to RS485 converter. It can convert any standard full duplex RS232C port to any two-wire balanced half duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers.
        Features:
        1. Port-powered from RS232 port (TXD,RTS,DTR): no external power is necessary 
        2. Convert RS-232(TXD,RXD signal) to RS-485 signal 
        3. Plug-and-Play (hot-pluggable, Data format Auto-sensing & Self-adjusting) 
        4. Data direction auto-turnaround, no flow control is required 
        5. Point to multi point, support 128 nodes loopback
    • Minimum Order Quantity: 1 Piece
    • Yes! I am Interested

      4 ports RS-485 to Fiber Optic Converter

      REQUEST CALLBACK

      4 ports RS-485 to Fiber Optic Converter
      Approx. Rs 3,700 / Piece
      Get Best Quote

      IMF204-2F-4DI(RS-485) is a high performance, unmanaged, redundancy ring RS485 to fiber converter, it used in industry application. It supports point to point two fiber port backup for each other, Fiber line(Ring) transmission, supports 4 channel RS-485(RS-485 adopted 5 bits terminal block) and 2 port 100Base-FX fiber port, meantime, 2 fiber port support redundancy ring function, network fault recovery time???20ms, it can easy and convenience manage the disperse serial device, main engine through serial port, take the intelligent redundancy for your network.
      It has high performance exchange engine, low consumption design, 3 different type power supply input and overload current and voltage protection. It special designed for industry high available data communication in power automation, industry automation, transportation, telecommunication area etc.
      It supported wall mounting and rack mount installation, easy to use for your project.
        Features1.Support 4 channel RS-485
        2.Support 2 port 100Base-FX Fiber
        3.Support dual(single) Ring line, ST/SC/FC optional    
        4.Support Redundancy ring, recovery time???20ms
        5.Support 0bps~115200bps
        6.Support Windows serial driver procedure format
        7.Provide Windows configuration tools, easy to use and install
        8.Support 3 types power supply input
        9.Industry grade design, IP30 protection level
        10.No fan, low consumption design
        11.Working temperature:-40℃-75℃
        12.Storage temperature: -40℃-85℃ SpecificationRS-485
        Channel of RS-485: 4
        RS-485 signal: D+???A???,D-(B)
        Parity: None,Even,Odd,Space,Mark
        Data bits: 5bit,6bit,7bit,8bit
        Stop bits: 1bit,1.5bit,2bit
        Baud rate: 0bps???115200bps
        Direction: Automatic detect data control 
        Loading: 32 nodes
        Transfer distance: 1200m
        Protection: 1.5KVAC isolation
        Connection: 5 bit terminal block
        Connector
        RS-485: 5 bit 5.08mm separation distance terminal block
        Optic fiber port: 100Base-FX, SC/FC/ST optional
        Transmission
        RS-485: 1200m
        Multi-mode: 1310nm, 2Km
        Single mode: 1310nm, 20/40/60Km
        1550nm, 20/40/60/80/100/120Km
        LED indicator
        COM1~COM4 running: COM1~COM4
        Device running: RUN
        Master/slave statues: M/S
        Optic fiber port (PORT1,PORT2) connection statues: LINK1, LINK2
        Power supply
        Power supply input: 12-48VDCNo-load consumption: 2.76W@24VDCFull-load consumption: 2.928W@24VDCMechanical characteristic
        Shell: IP30, metal case
        Installation: Wall mount or rack mount
        Weight: 597.8g
        Dimension(L×W×H): 200mm×120mm×35mm 
        Environment
        Working temperature: -40℃???75℃
        Storage temperature: -40℃???85℃ 
        Working humidity: 5%???95%( no condensation)
        Standard
        Shock: IEC 60068-2-27
        Free fall: IEC 60068-2-32
        Shake: IEC 60068-2-6 
    • Minimum Order Quantity: 1 Piece
    • Yes! I am Interested

       
      X


      Call Us: +91-8071807813
      Mootek Technologies
      D. Krish (Proprietor)
      N. No. 10, O. No. 14, 2nd Floor, Aranganathan Subway Road Kaveri Nagar, Saidapet, Saidapet Kaveri Nagar,
      Chennai - 600015, Tamil Nadu, India
      Contact via E-mail
      Contact via SMS



      Home  |   Profile   |  Our Product Range  |  Site Map  |   Contact Us   |   Mobile Site

      © Mootek Technologies. All Rights Reserved (Terms of Use)
      Developed and Managed by IndiaMART InterMESH Limited

      Mootek Technologies