Send Email
Send SMS
Search
Mootek Technologies
Mootek Technologies


Surge Protector

We are leading in manufacturing and supplier of Surge Protector in Chennai, Tamilnadu, India.

Electrical Surge Protector

REQUEST CALLBACK

Electrical Surge Protector
Approx. Rs 3,700 / Piece
Get Best Quote

Thanks for Contacting Us.

IEC61000-4-5 and ITU-TK20&K21 are the recognized standards for top quality surge protectors, FL45-1000 made by the high response surge arresters, the advantage allow clamping voltage and low loss against high speed signal, because it had a low capacitance. Designed to protect data communication lines in local and wide area networks up to 1000Base-TX transmission speeds.
FL45-1000 is designed by the theory of current limited and voltage clamped, discharged to ground. When the data line exist surge, the FL45-1000 is induced and worked ,the lightning energy is discharged to ground, and the high surge voltage is clamped to low level, so our devices is protected.

    Features1. IEC61000-4-5 and ITU-TK20&K212. The high response surge arresters3. Clamping voltage and low loss against high speed signal4. Designed by theory of current limited and voltage clamped,discharged to ground 5. Standard:10Base-T/100Base-TX/1000Base-TX Specification

    Standard: 10Base-T/100Base-TX/1000Base-TX standard

    10/100/1000M signal: IEC6100-4-5 and ITU-TK20&21

    Nominal discharge current(In):5 KA(8/20μS)

    Working voltage: 0-5V

    Limit voltage: ≤40V

    Apply Band rate: 1000Mbps

    Connector: RJ45 (F)

    The line of protection: 4 lines (1, 2, 3, 6)

    Insert consumption: ≤0.5dB

    Delay time: ≤1ns

    Working temperature:-20 to 60°C

    Storage temperature:-25 to 85°C

    Humidity: Relative humidity 5% to 95%

    No power supply needed, No consumption

    L×W×H: 72mm×42mm×25mm

    Shell: Alnico

    Color: Blue

    Weight: 10g

    Warranty: 3 years

    Approvals: FCC, CE, RoHS approvals

    Packing List

    1. Ethernet Surge Protector FL45-1000×1

    2. User manual ×1



Additional Information:

  • Delivery Time: immediately
  • Yes! I am Interested

    4 Channels Digital Video Optical Transceiver

    REQUEST CALLBACK

    4 Channels Digital Video Optical Transceiver
    Approx. Rs 13,000 / Piece
    Get Best Quote

    Thanks for Contacting Us.

    Product Details:
    Minimum Order Quantity1 Piece
    Brandmootek
    Colorblack
    Frequency Range6v
    Power100

    3onedata digital video optical transceivers SWV60400 series can simultaneously transmit 4 channels of 8-bit digitally encoded broadcast quality video/return or bidirectional data/unidirectional or bidirectional audio/Ethernet/Telephone/Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environment.

      Features1.8-bit digitally encoded and non-compression broadcast quality video transmission 
      2.Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols
      3.Support any high-resolution video signal  
      4.Automatic compatible PAL, NTSC and SECAM video system 
      5.Power supply and other parameter state indication, which can monitor the operation condition of system 
      6.Support no-damage regenerative trunk of video 
      7.Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required 
      8.Special ASIC design
      9.Industry-grade of operating temperature from -10°C to 65°C , which is applied to the different working environment
      10.Hot-swap function 
      11.Stand-alone type or card-type installed in 19"4U rack-mount chassis  SpecificationTechnical Specification
      Video channels:4 channels
      Video bandwidth:8 MHz
      Automatic compatible video system:PAL, NTSC, SECAM
      Video input/output impedance:75 Ω(unbalance)
      Video signal-to-noise ratio:≥67dB
      Differential gain:(10%-90%APL) DG <1% ( typical value)
      Differential phase:(10%-90%APL) DP <0.7° ( typical value)
      Video connector:BNC
      Fiber-optic Specification
      F/O connector: FC/ST/SC
      TX :Power:-15 ~ -8dBm   Sensitivity :≤-35dBm 
      RX:Power:-15 ~ -8dBm   Sensitivity :≤-35dBm
      Transmission Distance :20KM (single mode)
      Operating Wavelength: TX1310/RX1550nm (Transmitter); TX1550/RX1310nm (Receiver)
      Specification of custom-made options
      1. Data

      Connector: Terminal Blocks
      Encoded type : RS485 / RS422 / RS232 / Manchester
      Data rate : 0 - 400Kbps
      BER:  ≤10-9
      2. Audio
      Connector: Terminal Blocks
      Audio input / output impedance :600Ω(Balance/ unbalance)
      Audio input / output voltage :2Vp-p ( typical value)
      Audio input / output level :0dBm ( typical value)
      Video bandwidth:10HZ~12KHZ
      Audio digital encoded bandwidth :24bit
      Audio signal-to-noise ratio: S/N≥95dB  (weighted)
      3. Telephone
      Connector: RJ11
      Bandwidth :8KHZ
      Features:Support call-showing function ;support H-F
      Operating mode : Point to point hotline mode / FXS-FXO
      4. Ethernet
      Connector: RJ45
      Support mode : Half duplex or Full duplex
      Standards:IEEE802.3 
      Data rate : 10M / 100Mbps 
      Bandwidth: 25M
      Characteristic
      Dimensions: 19.2(L)×17.3(W)×2.8(H) cm
      Operating Voltage: DC5V (we will offer external power supply from AC96-240V to DC5V for each unit )
      Operating Temperature: -10°C to +65°C
      Storing Temperature: -45°C to +85°C
      Humidity: 0 to 95% non-condensing

    Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Delivery Time: immediately
  • Yes! I am Interested

     
    X


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Mootek Technologies
    D. Krish (Proprietor)
    N. No. 10, O. No. 14, 2nd Floor, Aranganathan Subway Road Kaveri Nagar, Saidapet, Saidapet Kaveri Nagar,
    Chennai - 600015, Tamil Nadu, India
    Call Us: 
    Call Response Rate: 98%
    Share Us :
    F G T L



    Home  |   Profile   |  Our Product Range  |  Site Map  |   Contact Us   |   Mobile Site

    © Mootek Technologies. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Mootek Technologies