Mootek Technologies

GW1108 series of Modbus gateway are designed for integrating Modbus RTU/ASCII and Modbus TCP; they can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocol. This series provide 3 types of products and support 8 RS-232, RS-485/422 or 3IN1 serial port and 1 100M Ethernet copper port. They adopt wall or desktop mounting to meet the requirements of different application scenes.

 

Modbus gateway supports multiple network protocols, such as Modbus, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocols. It possesses complete management function, and supports access control, rapid configuration, online upgrading, etc. RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes are supported; it supports up to 32 TCP Slave requests under Master mode and 16 TCP Master connections under Slave mode. TELNET, WEB and other access modes are also supported. It can provide you with good user experience via friendly design of network management system interface, simple and convenient operation.

 

DIP switch or RST button can achieve the device restore factory defaults. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

 

Additional Information:

• Item Code: MT9034
• Production Capacity: 1000
• Delivery Time: Immediately
• Packaging Details: Power cables,user manuals,warranty card

GW1101-1D (RS-485) is an Ethernet Modbus gateway that converts between Modbus TCP and Modbus RTU/ASCII protocols. It provides 1 port RS-485/422 serial (5 bit terminal block) and 1 port 10/100M Ethernet. Modbus TCP, Modbus RTU and Modbus ASCII protocol are integrated in the products, users can easily realize the seamless integration of Modbus Ethernet devices and Modbus serial devices and even multi master and slave hybrid networks. At the same time, the user can be set up by Web or Telnet. The simple design can not only realize the fast application, but also guarantee the application of the entire real industrial environment. The products using EMC protection design, can work in rugged environment.

Features 1. Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS protocol 2. Support 1 Port 10/100M Ethernet 3. Support 1 Port RS-485/422 4. Support WEB and Telnet configuration 5. Convert between Modbus TCP and Modbus RTU/ASCII 6. Support RTU Slave, RTU Master, ASCII Slave, ASCII Master four operating modes 7. Support ID mapping function, to achieve the management of the host ID 8. 300bps~115200bps baud rate and nonblocking communication 9. Support IP address and MAC address filtering function 10. Slave mode support 16 TCP master connections 11. Master mode support 32 slave TCP connection requests 12. Support Response Timeout and Interval Timeout setting 13. Support cross-gateway and cross-router communication 14. IP40 protection grade, metal shell, wall mounted installation 15. No fan, low consumption design 16. Working temperature: -40???75???

Specification Ethernet port Standard: 10Base-T, 100Base-TX Protocol: Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, APR, ICMP, DNS and DHCP Signal: Rx+, Rx-, Tx+, TxSpeed: 10/100Mbps Working: Full-duplex and half duplex Transfer distance: 100m Connector: RJ45 Serial port Serial port number: 1 ports RS-485/422 RS-485 signal: D+ (A), GND, D- (B) RS-422 signal: T+, T-, GND, R+, RParity bit: None, Even, Odd, Space, Mark Data bit: 7bit, 8bit Stop bit: 1bit, 2bit Baud rate: 300bps???115200bps RS-485/422 transfer distance: 1200m RS-485/422 connector: 5 bits terminal block Protection: class 3 static Master mode: 32 TCP slaves Slave mode: 16 TCP masters Work mode: RTU Slave, RTU Master, ASCII Slave, and ASCII Master LED Indicator Power (PWR) Ethernet port connect status (Link) Serial port data indicator: TX, RX; Power requirements Input voltage: 9~48VDC Type of input: 2 bits terminal block Consumption No-load consumption: 0.90W@9V Full-load consumption: 1.16W@9V Environment limits Working temperature: -40~75 Storage temperature: -40~85  Relative humidity: 5%~95 non-condensing Mechanical Shell: IP40 protection, metal shell Installation: Wall mounting Weight: 230g Size (L×W×H): 100mm×69mm×22mm Standard EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A EMS: EN 61000-4-2 (ESD), Level 3 Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 Warranty Warranty time: 3 years Certificates CE, FCC, RoHS, UL508 (pending) Ordering Information GW1101-1D(RS-485)-P (9~48VDC  1-port RS-485/422 to Ethernet Modbus Gateway (10M/100M), DC9~48V, wall mounting

Additional Information:

• Item Code: MT6098
• Production Capacity: 1000
• Delivery Time: Immediately
• Packaging Details: User manuals,Warranty card

GW1102 series of Modbus gateway are designed for integrating Modbus RTU/ASCII and Modbus TCP; they can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocol. This series provide 2 types of products and support 2 RS-232 or RS-485/422 and 1 100M Ethernet copper port. They adopt wall mounting to meet the requirements of different application scenes.

 

Modbus gateway supports multiple network protocols, such as Modbus, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocols. It possesses complete management function, and supports access control, rapid configuration, online upgrading, etc. RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes are supported; it supports up to 32 TCP Slave requests under Master mode and 16 TCP Master connections under Slave mode. TELNET, WEB and other access modes are also supported. It can provide you with good user experience via friendly design of network management system interface, simple and convenient operation.

 

DIP switch can achieve the device restore factory defaults. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

Additional Information:

• Item Code: MT9082
• Production Capacity: 1000
• Delivery Time: Immediately
• Packaging Details: Power cables, warranty card

GW1104 series of Modbus gateway are designed for integrating Modbus RTU/ASCII and Modbus TCP; they can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocol. This series provide 2 types of products and support 4 RS-485/422 or 3IN1 serial port and 2 100M Ethernet copper ports. They adopt wall or desktop mounting to meet the requirements of different application scenes.

 

Modbus gateway supports multiple network protocols, such as Modbus, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocols. It possesses complete management function, and supports access control, rapid configuration, online upgrading, etc. RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes are supported; it supports up to 32 TCP Slave requests under Master mode and 16 TCP Master connections under Slave mode. TELNET, WEB and other access modes are also supported. It can provide you with good user experience via friendly design of network management system interface, simple and convenient operation.

Additional Information:

• Item Code: MT8097
• Production Capacity: 1000
• Delivery Time: Immediately
• Packaging Details: Power cables,warranty card,User manuals

GW1104 series of Modbus gateway are designed for integrating Modbus RTU/ASCII and Modbus TCP; they can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocol. This series provide 3 types of products and support 4 RS-232, RS-485/422 or 3IN1 serial port and 1 100M Ethernet copper port. They adopt wall or desktop mounting to meet the requirements of different application scenes.

Modbus gateway supports multiple network protocols, such as Modbus, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocols. It possesses complete management function, and supports access control, rapid configuration, online upgrading, etc. RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes are supported; it supports up to 32 TCP Slave requests under Master mode and 16 TCP Master connections under Slave mode. TELNET, WEB and other access modes are also supported. It can provide you with good user experience via friendly design of network management system interface, simple and convenient operation.

Additional Information:

• Item Code: MT8904
• Production Capacity: 1000
• Delivery Time: Immediately
• Packaging Details: Power cables,warranty card

GW1101 series of Modbus gateway are designed for integrating Modbus RTU/ASCII and Modbus TCP; they can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocol. This series provide 2 types of products and support 1 RS-232 or RS-485/422 and 1 100M Ethernet copper port. They adopt wall mounting to meet the requirements of different application scenes.

 

Modbus gateway supports multiple network protocols, such as Modbus, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocols. It possesses complete management function, and supports access control, rapid configuration, online upgrading, etc. RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes are supported; it supports up to 32 TCP Slave requests under Master mode and 16 TCP Master connections under Slave mode. TELNET, WEB and other access modes are also supported. It can provide you with good user experience via friendly design of network management system interface, simple and convenient operation.

 

DIP switch can achieve the device restore factory defaults. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

Features 1. Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS protocol 2. Support 1 Port 10/100M Ethernet 3. Support 1 Port RS-485/422 4. Support WEB and Telnet configuration 5. Convert between Modbus TCP and Modbus RTU/ASCII 6. Support RTU Slave, RTU Master, ASCII Slave, ASCII Master four operating modes 7. Support ID mapping function, to achieve the management of the host ID 8. 300bps~115200bps baud rate and nonblocking communication 9. Support IP address and MAC address filtering function 10. Slave mode support 16 TCP master connections 11. Master mode support 32 slave TCP connection requests 12. Support Response Timeout and Interval Timeout setting 13. Support cross-gateway and cross-router communication 14. IP40 protection grade, metal shell, wall mounted installation 15. No fan, low consumption design 16. Working temperature: -40～75℃

Additional Information:

• Item Code: MT8901
• Production Capacity: 1000
• Delivery Time: Immediately
• Packaging Details: Power cable,Warranty Card

Introduction GW1101-1D (RS-485) is an Ethernet Modbus gateway that converts between Modbus TCP and Modbus RTU/ASCII protocols. It provides 1 port RS-485/422 serial (5 bit terminal block) and 1 port 10/100M Ethernet. Modbus TCP, Modbus RTU and Modbus ASCII protocol are integrated in the products, users can easily realize the seamless integration of Modbus Ethernet devices and Modbus serial devices and even multi master and slave hybrid networks. At the same time, the user can be set up by Web or Telnet. The simple design can not only realize the fast application, but also guarantee the application of the entire real industrial environment. The products using EMC protection design, can work in rugged environment.

 Features 1. Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS protocol 2. Support 1 Port 10/100M Ethernet 3. Support 1 Port RS-485/422 4. Support WEB and Telnet configuration 5. Convert between Modbus TCP and Modbus RTU/ASCII 6. Support RTU Slave, RTU Master, ASCII Slave, ASCII Master four operating modes 7. Support ID mapping function, to achieve the management of the host ID 8. 300bps~115200bps baud rate and nonblocking communication 9. Support IP address and MAC address filtering function 10. Slave mode support 16 TCP master connections 11. Master mode support 32 slave TCP connection requests 12. Support Response Timeout and Interval Timeout setting 13. Support cross-gateway and cross-router communication 14. IP40 protection grade, metal shell, wall mounted installation 15. No fan, low consumption design 16. Working temperature: -40???75???

Specification Ethernet port Standard: 10Base-T, 100Base-TX Protocol: Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, APR, ICMP, DNS and DHCP Signal: Rx+, Rx-, Tx+, TxSpeed: 10/100Mbps Working: Full-duplex and half duplex Transfer distance: 100m Connector: RJ45 Serial port Serial port number: 1 ports RS-485/422 RS-485 signal: D+ (A), GND, D- (B) RS-422 signal: T+, T-, GND, R+, RParity bit: None, Even, Odd, Space, Mark Data bit: 7bit, 8bit Stop bit: 1bit, 2bit Baud rate: 300bps???115200bps RS-485/422 transfer distance: 1200m RS-485/422 connector: 5 bits terminal block Protection: class 3 static Master mode: 32 TCP slaves Slave mode: 16 TCP masters Work mode: RTU Slave, RTU Master, ASCII Slave, and ASCII Master LED Indicator Power (PWR) Ethernet port connect status (Link) Serial port data indicator: TX, RX; Power requirements Input voltage: 9~48VDC Type of input: 2 bits terminal block Consumption No-load consumption: 0.90W@9V Full-load consumption: 1.16W@9V Environment limits Working temperature: -40~75??? Storage temperature: -40~85??? Relative humidity: 5%~95%???non-condensing??? Mechanical Shell: IP40 protection, metal shell Installation: Wall mounting Weight: 230g Size (L×W×H): 100mm×69mm×22mm Standard EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A EMS: EN 61000-4-2 (ESD), Level 3 Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 Warranty Warranty time: 3 years Certificates CE, FCC, RoHS, UL508 (pending)

Additional Information:

• Item Code: MT9038
• Production Capacity: 1000
• Delivery Time: Immediately
• Packaging Details: Power cables,antenna,user manuals,warranty card

Introduction GW1101-1D (RS-485) is an Ethernet Modbus gateway that converts between Modbus TCP and Modbus RTU/ASCII protocols. It provides 1 port RS-485/422 serial (5 bit terminal block) and 1 port 10/100M Ethernet. Modbus TCP, Modbus RTU and Modbus ASCII protocol are integrated in the products, users can easily realize the seamless integration of Modbus Ethernet devices and Modbus serial devices and even multi master and slave hybrid networks. At the same time, the user can be set up by Web or Telnet. The simple design can not only realize the fast application, but also guarantee the application of the entire real industrial environment. The products  using EMC protection design, can work in rugged environment.

Features 1. Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS protocol 2. Support 1 Port 10/100M Ethernet 3. Support 1 Port RS-485/422 4. Support WEB and Telnet configuration 5. Convert between Modbus TCP and Modbus RTU/ASCII 6. Support RTU Slave, RTU Master, ASCII Slave, ASCII Master four operating modes 7. Support ID mapping function, to achieve the management of the host ID 8. 300bps~115200bps baud rate and nonblocking communication 9. Support IP address and MAC address filtering function 10. Slave mode support 16 TCP master connections 11. Master mode support 32 slave TCP connection requests 12. Support Response Timeout and Interval Timeout setting 13. Support cross-gateway and cross-router communication 14. IP40 protection grade, metal shell, wall mounted installation 15. No fan, low consumption design 16. Working temperature: -40???75???

Features 1. Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS protocol 2. Support 1 Port 10/100M Ethernet 3. Support 1 Port RS-485/422 4. Support WEB and Telnet configuration 5. Convert between Modbus TCP and Modbus RTU/ASCII 6. Support RTU Slave, RTU Master, ASCII Slave, ASCII Master four operating modes 7. Support ID mapping function, to achieve the management of the host ID 8. 300bps~115200bps baud rate and nonblocking communication 9. Support IP address and MAC address filtering function 10. Slave mode support 16 TCP master connections 11. Master mode support 32 slave TCP connection requests 12. Support Response Timeout and Interval Timeout setting 13. Support cross-gateway and cross-router communication 14. IP40 protection grade, metal shell, wall mounted installation 15. No fan, low consumption design 16. Working temperature: -40???75???

Additional Information:

• Item Code: MT890
• Production Capacity: 1000
• Delivery Time: Immediately
• Packaging Details: User manuals,warranty card

GW1102 series of Modbus gateway are designed for integrating Modbus RTU/ASCII and Modbus TCP; they can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocol. This series provide 2 types of products and support 2 RS-232 or RS-485/422 and 1 100M Ethernet copper port. They adopt wall mounting to meet the requirements of different application scenes. Modbus gateway supports multiple network protocols, such as Modbus, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocols. It possesses complete management function, and supports access control, rapid configuration, online upgrading, etc. RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes are supported; it supports up to 32 TCP Slave requests under Master mode and 16 TCP Master connections under Slave mode. TELNET, WEB and other access modes are also supported. It can provide you with good user experience via friendly design of network management system interface, simple and convenient operation. DIP switch can achieve the device restore factory defaults. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system. Features and Benefits Support 10/100Base-T(X) self-adaptive Ethernet interface Support 300bps-115200bps line speed and non-blocking communication Support RTS/CTS, DTR/DSR and XON/XOFF flow control Support response timeout setting of characters Support RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes Support up to 32 TCP Slave requests under Master mode Support up to 16 TCP Master connections under Slave mode Support virtual and real ID mapping to achieve flexible access between Master and Slave devices Support IP address and MAC address filtering, which is easy to achieve accurate access control Support classification of user management to achieve humanized permission management Support monitoring for serial port status and parameters, so the communication status will be clear at a glance Support Windows configuration tool, TELNET, WEB configuration forms and access control

GW1102 series of Modbus gateway are designed for integrating Modbus RTU/ASCII and Modbus TCP; they can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocol. This series provide 2 types of products and support 2 RS-232 or RS-485/422 and 1 100M Ethernet copper port. They adopt wall mounting to meet the requirements of different application scenes. Modbus gateway supports multiple network protocols, such as Modbus, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocols. It possesses complete management function, and supports access control, rapid configuration, online upgrading, etc. RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes are supported; it supports up to 32 TCP Slave requests under Master mode and 16 TCP Master connections under Slave mode. TELNET, WEB and other access modes are also supported. It can provide you with good user experience via friendly design of network management system interface, simple and convenient operation. DIP switch can achieve the device restore factory defaults. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system. Features and Benefits Support 10/100Base-T(X) self-adaptive Ethernet interface Support 300bps-115200bps line speed and non-blocking communication Support RTS/CTS, DTR/DSR and XON/XOFF flow control Support response timeout setting of characters Support RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes Support up to 32 TCP Slave requests under Master mode Support up to 16 TCP Master connections under Slave mode Support virtual and real ID mapping to achieve flexible access between Master and Slave devices Support IP address and MAC address filtering, which is easy to achieve accurate access control Support classification of user management to achieve humanized permission management Support monitoring for serial port status and parameters, so the communication status will be clear at a glance Support Windows configuration tool, TELNET, WEB configuration forms and access control

GW1102 series of Modbus gateway are designed for integrating Modbus RTU/ASCII and Modbus TCP; they can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocol. This series provide 2 types of products and support 2 RS-232 or RS-485/422 and 1 100M Ethernet copper port. They adopt wall mounting to meet the requirements of different application scenes. Modbus gateway supports multiple network protocols, such as Modbus, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocols. It possesses complete management function, and supports access control, rapid configuration, online upgrading, etc. RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes are supported; it supports up to 32 TCP Slave requests under Master mode and 16 TCP Master connections under Slave mode. TELNET, WEB and other access modes are also supported. It can provide you with good user experience via friendly design of network management system interface, simple and convenient operation. DIP switch can achieve the device restore factory defaults. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system. Features and Benefits Support 10/100Base-T(X) self-adaptive Ethernet interface Support 300bps-115200bps line speed and non-blocking communication Support RTS/CTS, DTR/DSR and XON/XOFF flow control Support response timeout setting of characters Support RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes Support up to 32 TCP Slave requests under Master mode Support up to 16 TCP Master connections under Slave mode Support virtual and real ID mapping to achieve flexible access between Master and Slave devices Support IP address and MAC address filtering, which is easy to achieve accurate access control Support classification of user management to achieve humanized permission management Support monitoring for serial port status and parameters, so the communication status will be clear at a glance Support Windows configuration tool, TELNET, WEB configuration forms and access contro