Resistive Touch Screen

Approx. Rs 4,000 / PieceGet Latest Price

Product Details:

MODEL7305 Optic Fiber Modem is a high-performance optic modem developed by using a dedicated integrated circuit. It is to modulate a N64K Ethernet data signal directly over single or multi-mode optic fiber for a transmission via optic cable line. At another end of the optic cable, optical signal is demodulated into an Ethernet data signal. Ethernet interface may be directly connected with the Ethernet interfaces of image and data terminals or the WAN ports of MUX, exchanger and router for a dedicated network setup or a LAN connection.

Features:

• Rate N64Kbit/s (N=1~32)
• Support the loopback of local analog/digital interface
• Support remote loopback function
• Support pseudo-random code test function
• 120km trunking -free transmission distance for single-mode optic fiber
• Capable to be communicated with FE1 Fiber Modem
• Available with complete line detection and alarm indications
• Available with independent structure and 19-inch Rack-mountable structure Rack-mountable structure can be inserted with 16 modules
• AC 220V and DC 48V inputs may be selected for fiber optic modems of both structure
• For Rack-mountable fiber optic modems, dual power supply heat backup is provided to ensure a high operating reliability

Specifications:

Optic interface:

• Line mode type: CMI
• Operating wavelength: 850nm,1310nm or 1550nm
• Optic fiber connector: SC/PC
• Applicable optic fiber : multi-mode, single-mode
• Transmission distance: Single-mode: up to 120km
• Multi-mode: up to 2km

ETH interface:

• Standard: Compatible with IEEE802.3
• Type of connector: RJ45 connector
• Full duplex auto-negotiation

Indicator lamps:

• To indicate the operating status of power supply, data receiving/sending, loopback and random code test, code missing alarm, out-of-frame alarm etc.

Structure:

• Independent: 140mm (depth) x 210mm (width) x 42mm (height)
• Rack-mountable: 19in 4.5U standard casing

Power supply:

• Independent: 85V264V AC input, 5V/2A output-36V-72V DC input , 5V/2A output
• Rack-mountable: 150V260V AC input, 5V/16A , 12V/1A output-38V-58V DC input, 5V/16A , 12V/1A output
• Warranty: 5 years
• Approvals: FCC, CE, RoHS approvals

Approx. Rs 13,500 / Piece(s)Get Latest Price

Product Details:

Resistive touch screen is the preferred solution for low cost applications. It consists of a conductive bottom layer (ITO Glass or Film) and a conductive top layer (ITO Film). The two layers are suspended by many very small spacer dots. When a certain point is touched, the top layer contacts the bottom layer and a voltage charged by the controller is applied to the bottom layer's electrodes. The coordinate X axis of the touch point can be detected by measuring the voltage value thru the top ITO layer and the coordinate Y axis of the touch point can be detected in the same way by changing voltage input to the top layer's electrodes.

Specification:

• Construction: Film Glass Fpc
• Size:3.0' To 22'
• Tail:fpc
• Surface Hardness: 3h
• Working Voltage: 5.0v.circuit Grade Dc5v 1ma
• Insulation Impedance ≥20mω(25v Dc)
• Linearity ≤1.5
• Light Transmission ≥80
• Operating Force: 10g~100g
• Scoring Life Expectancy:≥1.000.000
• Operating Temperature:-10¿¿¿~ 60¿¿¿ ≤90%rh
• Storage Temperature:-20¿¿¿~ 70¿¿¿ ≤90%rh
• No Noted Size Common Difference:±0.20

Works With The Operating Systems:

• Windows 7
• Windows Vista
• Windows 9X / Me
• Windows 2000-XP
• Windows NT4
• Windows 98
• Windows CE
• Linux
• Dos
• Mac OS X
• Mac OS 9X

Application:

• MID,Tablet PC,Digital photo frame,Car GPS.
• POS.All-in-one.KIOSK.Advertising display.ATM.
• Medical device/Medical equipment
• Light Industrial equipment,Home appliances
• Portable sport devices,Access control terminals
• Personal computer and office.

Package included:

• Touch Screen
• USB controller
• CD driver
• USB cable

Approx. Rs 28,000 / PieceGet Latest Price

Product Details:

Technical specifications:

Product Performance:

• Quad-band GSM modem (EG-SM850/900/1800/1900MHZ applied
• To the data fax voice and messaging applications, has been certified
• By all of its design and development of the ETSI GSM Phase2 standard (General Tele- Phone)

Output power:

• Class4(2w@900MHz)
• Class1(1w1800/1900MHz)

Interface support:

• AT command used for the control (GSM07.07 and 07.05) link bit rate from 300 to 115,200 bits/s
• Automatic bit rate (300 to 38,400 bit/s) through micro – FIT$ Plug power connector
• SMA antenna interface
• Down the SIM card memory

Included Accessories:

• Power Adapter , data cable ( USB )antenna

Input current:

• 5mA standby , 140 mA @ 12V calls in the state GSM900MHz
• 5ma standby,100 mA,100mA @ 12V calls in the state GSM1800/1900MHz

Features:

• Bulk SMS - 9600 SMS Per hour
• Bulk Voice Call
• Automatic Mobile Recharge Function
• Support USSD Code( Balance Checker)
• Support Success/Failed SMS Count (Rotation)
• Support Sucess/Failed Call Function (Rotation)
• Support Time Based Rotation
• Support Bulk Call Usages
• Support IMEI Change function
• Support Missed Call
• Support DTMF Tone
• Support ALL Sim Tool Kits
• Support OTOMAX Recharge Software
• Support Airfly Softwares ( SMS Softwares)

Approx. Rs 8,000 / PieceGet Latest Price

Product Details:

OVERVIEW:
Resistive touch screen is the preferred solution for low cost applications. It consists of a conductive bottom layer (ITO Glass or Film) and a conductive top layer (ITO Film). The two layers are suspended by many very small spacer dots. When a certain point is touched, the top layer contacts the bottom layer and a voltage charged by the controller is applied to the bottom layer's electrodes. The coordinate X axis of the touch point can be detected by measuring the voltage value thru the top ITO layer and the coordinate Y axis of the touch point can be detected in the same way by changing voltage input to the top layer's electrodes.

Specification:

• Construction: Film Glass FPC
• Size:3.0' to 22'
• Tail:FPC
• Surface Hardness: 3H
• Working Voltage: 5.0V.Circuit grade DC5V 1mA
• Insulation impedance≥20MΩ(25V DC)
• Linearity≤1.5
• Light Transmission≥80
• Operating Force: 10g~100g
• Scoring Life Expectancy:≥1.000.000
• Operating Temperature:-10℃~ 60℃≤90%RH
• Storage Temperature:-20℃~ 70℃≤90%RH
• No noted size common difference:±0.20

Works With The Operating Systems:

• Windows 7
• Windows Vista
• Windows 9X / Me
• Windows 2000-XP
• Windows NT4
• Windows 98
• Windows CE
• Linux
• Dos
• Mac OS X
• Mac OS 9X

Application:

• MID,Tablet PC,Digital photo frame,Car GPS.
• POS.All-in-one.KIOSK.Advertising display.ATM.
• Medical device/Medical equipment
• Light Industrial equipment,Home appliances
• Portable sport devices,Access control terminals
• Personal computer and office.

Approx. Rs 8,000 / PieceGet Latest Price

Product Details:

Approx. Rs 16,000 / PieceGet Latest Price

Product Details:

Approx. Rs 8,000 / PieceGet Latest Price

Product Details:

Overview:
5-Wire Resistive touchscreen, features unrivaled accuracy, reliability, superior light transmission, highest touchpoint density, sensitive and drift-free. Imperious to environmental conditions such as liquid splashes and washdown, these screens are the most contamination-resistant available. It can be touched by finger, gloved finger, leather or stylus pen. The life time is up to 35 million finger touches, much better than 4 wire resistive touchscreen, delivering fantastic performance in retail, industry, transportation, financial, hospital, .Kiosk or telecom field.

Specification:
1.Construction: Film Glass FPC
Tail:FPC
2. Working Voltage: 5.0V
3. Circuit grade DC5V 1mA
4. Insulation impedance ≥20MΩ(25V DC)
5. Linearity ≤1.5
6. Light Transmission ≥80
7. Operating Force: 10g~100g
8. Scoring Life Expectancy:≥1.000.000
9. Operating Temperature:-10???~ 60??? ≤90%RH
10.Storage Temperature:-20???~ 70??? ≤90%RH
11.No noted size common difference:±0.20