POE Switches

Model : IES215IES215 is a type of unmanaged industrial Ethernet switch with 5 port 10Base-T/100Base-TX Ethernet , supports IEEE802.3, EEE802.3u standard, can provide economical solution for your network connection. IP40 grade protection ensures reliable work in terrible environment. LED indicator is helpful to monitor and control the status of network connection. It complies with FCC, CE standard.DIN rail installation and wide operating temperature (-40~75???), can satisfied some kinds of industrial environment, can provide reliable and quickly solution for your Ethernet device.

The switch is a new generation designed for high security and high performance network the second layer switch. Provides twenty-four 10/100/1000Mbps self-adaption RJ45 port, and two 100/1000Mbps SFP optical ports, all ports support wire-speed forwarding, can provide you with larger network flexibility. Support VLAN ACL based on port, easily implement network monitoring, traffic regulation, priority tag and traffic control. Support traditional STP/RSTP/MSTP 2 link protection technology; greatly improve the ability of fault tolerance, redundancy backup to ensure the stable operation of the network. Support ACL control based on the time, easy control the access time accurately. Support 802.1x authentication based on the port and MAC, easily set user access. Perfect QOS strategy and plenty of VLAN function, easy to maintenance and management, meet the networking and access requirements of small and medium-sized enterprises, intelligent village, hotel, office network and campus network.
Its ports support POE power supply function, support IEEE802.3at standard, 802.3af backward compatibility, power supply equipment for Ethernet, can automatically detect identification standard of electrical equipment, and through the cable for the power supply

Features:

• Complies with IEEE 802.3i, IEEE 802.3u, IEEE802.3x , IEEE802.3ab , IEEE802.1q , IEEE802.1p standards
• Supports IEEE802.3af???IEEE802.3at standards
• Supports PoE power up to 30W for each PoE port, all power up to 380W
• Supports manage the POE port, support POE port power on/off and port output power restriction
• Support Web interface management
• 24 x 10/100/1000Mbps Auto MDI/MDI-X Ethernet port,Support ports Auto MDI/MDIX
• 8K entry MAC address table of the switch with auto-learning and auto-aging
• Supports IEEE802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
• Supports QoS (quality of service), port mirror, Link aggregation protocol
• Supports packet length 9216Bytes jumbo frame packet forwarding at wire speed
• LED indicators for monitoring PSE, Link / Activity/Speed

Model : ES5026G-2GS-24POE-450W-P(220VAC)ES5026G-2GS-24POE-450W is Full gigabit , managed , 26-port Gigabit high power (IEEE 802.3at) PoE Switches,utilizing a compact factor which can be mounted in a 19-inch rack with rack-mounting kits or placed on desktop.

With data and power supported by one unit, the ES5026G-2GS-24POE-450W-P(220VAC) shall reduce cables and eliminate the need for dedicated electrical outlets on the wall,ceiling or any unreachable place. Auto PoE detection and Plug and play installation makes ES5026G-2GS-24POE-450W-P(220VAC) Gigabit PoE Switch easy to use and with clear LED indicators to tell the working condition.

Features:

• Compatible with both IEEE802.3at(30W) and IEEE802.3af(15.4W)
• Automatically detect and supply power to IEEE802.3at and IEEE 802.3af compliant powered devices(PDs)
• Advanced SAFC function, only supply power to IEEE 802.3af/at compliant PDs, no worry about damaging other private standard POE devices or devices without POE function
• Support port power supply prioritization, guarantee the continuous power supply of key nodes
• Up to 100m network cable transmitting distance
• Built-in PSE power supply module, plug-and play design, easy to install
• High security performance defending against power surge
• Support short-circuit protection function
• Energy-saving green design, support auto-switch to standby mode and auto-detect cable length.
• Support simple WEB management, easy to configure the functions of switches

The MT-IES-M-7028G-20SFP-8GE series layer 2 full Gigabit managed Industrial Ethernet Switch is a high-performance Ethernet communication product developed for industrial communication. The product uses high-performance industrial-grade switch chip. It supports 8 Gigabit Combo ports +20 Gigabit SFP ports with AC220V/DC110V power input. It can improve network communication stability with wiring saved. The MISCOM7028GX series products can meet the high-end requirements of the industrial application environment and the communication performance especially for the smart grid.

 Features:

-8 Gigabit Combo ports+20 Gigabit SFP ports

-Support status display with front and back side indicator lights

-Support MW-Ring patent redundancy technique (failure recovery time <20ms)

-Support static multicast filtering, IGMP Snooping

-Supports broadcast storm suppression and port rate control

-Support power off, fiber off, storm and other status relay alarm output

-Support isolated power supply, optional dual redundant power supply

-Support managed function such as VLAN, QoS, Trunking, and port mirroring

-Wide temperature range design, fanless thermal design

-Satisfy harsh industrial environment